Hi I have a 1979 20 HP Seahorse Model number 20CR79R SN 8054618 (possibly there is a C in front of the 8). A little history I have found out is that this is the same motor as a 1979 25 HP seahorse American model. this one was re branded for Canadian sale and I am told there is some change to bring it down 5 HP. The motor starts and runs fine. I used it last season and worked fine (great considering it was sitting for years before I got it) in the fall I drained the leg and refilled it for winter storage. I have pulled it out today and started it up ran fine took only a couple pulls. I do have a water muffler on it that clamps on to the leg where I assume it pulls water for the water pump. ( looking at the back of the engine...facing the prop.. it would be on the left hand side of the leg a small plate with three small holes held on by two screws when you take off the two screws its kind of a U shaped hole). From what I heard this engine does not pee water out to indicate that its pumping water to cool it down. So that brings me to my question... How do I know that it is working and can I test it before I take it out on the water this season?
Any help on this would be great and much appreciated THANK YOU!
Any help on this would be great and much appreciated THANK YOU!