Hello peoples,
This is my first post on here, been looking at loads amounts of info. I just took owner ship of a 1972 Glastron v163 with Johnson 85 motor.
Boat is in awesome condition, and motor runs great.
I need to pick your guys brain.
The motor runs great above 1000 rpms. When below, there is a miss/jolt every now and then.
This is what has been done.
New reed valves.
Plugs/wires.
points.
Fuel filters clean/changes.
Compression is good.
Carb rebuild.
Some other stuff, cant remember right now. All the work was done by previous owner.
What else should i look at?
Thanks in advance!
This is my first post on here, been looking at loads amounts of info. I just took owner ship of a 1972 Glastron v163 with Johnson 85 motor.
Boat is in awesome condition, and motor runs great.
I need to pick your guys brain.
The motor runs great above 1000 rpms. When below, there is a miss/jolt every now and then.
This is what has been done.
New reed valves.
Plugs/wires.
points.
Fuel filters clean/changes.
Compression is good.
Carb rebuild.
Some other stuff, cant remember right now. All the work was done by previous owner.
What else should i look at?
Thanks in advance!