fishinwithmercury32
Cadet
- Joined
- Mar 20, 2012
- Messages
- 24
I have just rebuilt the carb and replaced the check valves in the fuel pump along with all gaskets. Im not getting a continuous pull on the gas/oil mix. It runs for a second when i put gas/oil directly into the carb but wont stay running. Also, when i take off the hose from pump to carb and crank, there is no gas spitting or pumping. Only when i squeeze the bulb.
I'm at a loss. Any help would be much appreciated.
Thanks,
I'm at a loss. Any help would be much appreciated.
Thanks,