1971 60 HP Exhaust Leak

Goneflying

Cadet
Thread starter
Joined
Apr 20, 2016
Messages
10
Hey guys,

I have a 1971 60hp Johnson that has a pretty bad exhaust leak. I believe its the powerhead gasket that is causing the issue. My question is, how difficult is that to fix? I don't have any experience with repairing outboard motors but I am a very mechanical person. Just wondering if I should attempt it myself or bring it to the shop?

Thanks for the help!
 

racerone

Honorary Supreme Mariner
Joined
Dec 28, 2013
Messages
40,028
Not hard to do.---Take your time and ask questions before using a hammer.
 

F_R

Honorary Supreme Mariner
Joined
Jul 7, 2006
Messages
28,226
Has somebody had the lower unit off? Did they put the seal back on top of the water pump? Did they pull the electric shift cable up far enough (so the annular-ring portion is sealing in the hole)? Either of these faults will smoke up the powerhead.
 

Goneflying

Cadet
Thread starter
Joined
Apr 20, 2016
Messages
10
So i got the power head off and discoverd the exhaust adapter around the rear most center bolt had fractured and has a piece that broke off which is causing the leak. I ordered a new adapter. My question now is do i have to take the lower unit off to get the exhaust adapter off?
 
Top