1963 Evinrude 40 HP

Zack0223

Recruit
Thread starter
Joined
Jun 5, 2017
Messages
1
Hey guys,

​I just got a 1963 MFG westfield all original with the original 1963 Evinrude 40 HP. this boat hasn't been run in 20+ years and I recently got it running this weekend after changing the whole ignition coils, magnetos, points, condensers ETC and I gone through the whole engine... I'm wondering what kind of gas I should be running in this motor due to it not being run in so many years and if its safe to run seafoam in there to clean the carbs out a little more... ANY advice will help.

TIA-
zack
 

F_R

Honorary Supreme Mariner
Joined
Jul 7, 2006
Messages
28,226
Regular 87 octane pump gas and TC-W3 outboard motor oil is all I ever use. Mix it 24:1. Now everybody can chime in and give their valued opinions. Especially concerning ethanol.

I'd hold off on the Seafoam till you are satisfied all is well.
 

gm280

Supreme Mariner
Joined
Jun 26, 2011
Messages
14,605
:welcome: aboard Zack0223. Nice to have you as a new member...

When you say you when through the engine, did that include rebuilding the carb? If not, I would most certainly put a carb kit in it after cleaning and then you would not have to worry about that. And post a picture or three so we can see what you are dealing with. We love pictures on these forums. JMHO
 
Top