LakeRacer99
Cadet
- Joined
- May 25, 2007
- Messages
- 11
so, I bought the seal kit for the 1958+ from sierra and the propshaft seal is too small. Anyone have any suggestions for a source for this seal?
I know I need a seal that is 1.250" OD, 0.665" ID, and 0.312" Thick. I think it would need to be stainless or brass also.
Any help, part numbers or weblinks would be appriciated.
Thanks,
I know I need a seal that is 1.250" OD, 0.665" ID, and 0.312" Thick. I think it would need to be stainless or brass also.
Any help, part numbers or weblinks would be appriciated.
Thanks,
