cary00silve
Seaman
- Joined
- Jan 21, 2007
- Messages
- 72
I have had an overheating problem with my 5hp buc, so I replaced the water pump with the retrofit kit available at the dealer. The original impeller was about 2 inches in diameter, and the new kit came with a plastic housing and an impeller about 1 inch in diameter. The motor still doesn't seem to pump enough water, and still overheats at WOT. The passages are clear, it just doesn't seem to be pulling enough water. I pulled the lower unit off today, and the impeller looks great with little to now wear. I checked the passages again, and made sure the cooling pipe is locked into place on both the powerhead and the impeller housing, but it still doesn't pump enough. Is this retrofit kit junk, or is something else wrong?