Re: 1955 15hp Evinrude, clutch dog, 15 converted to 18??
Well I got one coming in the mail so I hope it fits, I think Iam going to try it with just the clutch dog an original forward gear. I called twin city for a seal kit for lower unit an they really couldn't help they just said they have them for a 58 18hp so I figured I would try it, got it last week an the seal I need is under the water pump an it appears to be the same seal however the prop shaft seal is not even close but that was supposedly replace. The shift rod O ring seems like it should work but not positive, and I assume the spaghetti rubbers are all the same diameter. Its funny but the water pump was installed wrong one finger was swept the wrong direction, has new ignition parts but was running on one cylinder, the guy just pushed the old corroded wires back in an one coil arced to itself an melted the plastic where the wire plugs in. Would that damage the coil? I have spark now but its not as solid as the other coil, however it runs better now, short of idle yet. Hoping that is the dirty carb an adjustment. Where can I get new wires that will fit?