1954 QD15 slow needle valve

nickastaldo

Recruit
Thread starter
Joined
Apr 15, 2016
Messages
2
Hello everyone. I'm in the process of cleaning my carb and I noticed that the very tip of my slow needle valve is bent. I know that there is usually a zero tolerance to these things, so I was looking to buy a new one. I've scoured the internet, and I have yet to find a definite part number for my motor. It seems like my motor is too old to have a listing on any of the online dealers, including this one. Does anyone have a part number, or a year cross reference so I can order a used one, or have information on how I can find one for myself? Any help will be very appreciated!
 

F_R

Honorary Supreme Mariner
Joined
Jul 7, 2006
Messages
28,226
I don't have the '54 book, but do have the '56 QD-17 book. There is a real good chance the needle is the same, but I can't verify that. QD-17 needle is part number 303946.

Have you tried straightening the old one? Roll the tip with some pressure it on a flat surface like a piece of glass. Worst thing that can happen is you might break it off. But hey, it isn't good the way it is, right?
 

nickastaldo

Recruit
Thread starter
Joined
Apr 15, 2016
Messages
2
You are awesome. Looking at pictures of that part number, it looks to the same! I'll attempt to roll out out with your technique to see if I can save myself from buying a replacement. Thanks! Now just have to wait for my float and glass bowl gasket to get in!
 
Top