125 force timming marks

[stang1945]

looking at flywheel i see 3 marks l l l i asume the one in the middle is zero.what are the other two.then off to the right of these about 3 inches is a single mark.is this possible the 32 degree mark.trying to set the timming or atleast make sure it is okay.thanks for your help. jim

 

[Bifflefan]

Re: 125 force timming marks

well i dont have an easy answer for ya,

Find TDC by using a stopper in the plug hole. then you will know if the middle one is accually TDC. then you can use a protractor to see what the other marks are in degrees.
wierd that they are not marked, but i dont know anything about a Force eather.

 

[pnwboat]

Re: 125 force timming marks

The three marks together going from left to right are 32, 30 and 28 degrees advance. The single mark by itself is 0 or TDC.