125(force) chrysler

[avemaria]

I am stuck in one gear Linkage appears to be going up and down under carbs but no change it just stays in fwd.I can start it in the nutral pos. but prop is engaged.Fwd always?Can any one help.Whats the prob.

 

[moparman]

Re: 125(force) chrysler

have you changed the lower end oil before this started ? If you can give more details ,it would be helpful [ its been giving problems going into gear, I just serviced lower foot oil, its been doing fine ,and just started this after I hit something in the water,ect......]give us some history please

 

[jerbear56]

Re: 125(force) chrysler

There is a link that connects the shift rod just above the gearbox at the lower end. Sounds like one of the pins fell out of it.

 

[john from md]

Re: 125(force) chrysler

Did anyone remove the shift link pin in the lower end? That would cause this problem.

Try disconnecting the shift linkage at the lower by removing the cotter pin.

While spinning the prop by hand, see if you can disengage the gear.

John