16.5 Lund tyee 4.9 (44mph2person) 5100rpm
Problem I have is it takes 15 to 45 minutes sometimes before I can get the other 2 cylinders to kick in then it's good for rest of the day.( After 1800 rpm all 4 cylinders fire). Things I have tried carbs cleaned with chem-dip and replaced carbs and linkage, plugs changed and hotter, fuel pump and vacuum hoses cleaned or replaced, ran premixed gas and oil, timing*+ and -
I am new (3 years on the water) to outboards but am learning could use some direction here please.
Are theses things possibly stopping the lower 2 cylinders from firing???
*
Thermostats see i have 2 (143) and (120) could they be sticking causing problem.
Next I think I have a 19 pitch prop would 18 give me more rpm there for make the other 2 cylinders fire more easy cuz less drag ( it runs at 5100 rpm now witch is close to accurate I think old tachometer and sticks slightly at 3200rpm.*
Last is my reeds are sticking then work fine for rest of day??
Problem I have is it takes 15 to 45 minutes sometimes before I can get the other 2 cylinders to kick in then it's good for rest of the day.( After 1800 rpm all 4 cylinders fire). Things I have tried carbs cleaned with chem-dip and replaced carbs and linkage, plugs changed and hotter, fuel pump and vacuum hoses cleaned or replaced, ran premixed gas and oil, timing*+ and -
I am new (3 years on the water) to outboards but am learning could use some direction here please.
Are theses things possibly stopping the lower 2 cylinders from firing???
*
Thermostats see i have 2 (143) and (120) could they be sticking causing problem.
Next I think I have a 19 pitch prop would 18 give me more rpm there for make the other 2 cylinders fire more easy cuz less drag ( it runs at 5100 rpm now witch is close to accurate I think old tachometer and sticks slightly at 3200rpm.*
Last is my reeds are sticking then work fine for rest of day??