01 Merc 75hp ELPTO

[palmerdf0130]

Hello,
Can anyone provide a copy of the service manual page for setting float height on outboard listed in title? I have searched the web and cannot find a definite answer. Some say 9/16" measured at lowest point opposite of needle and others say it should be 9/16" to flat part of float before it slopes down. Some also say the float should be level. Thanks in advance for any and all info.

 

[Texasmark]

level with the upper casting is what I always used with the carb upside down.

 

[Faztbullet]

 

[Faztbullet]

Depends on which OEM manual you look in.

 

[palmerdf0130]

Thanks fellas. The carbs are WME 84's and I did some more searching and found this, which is pretty much identical to Faztbullet's second pic