The iboats forum moderators are excited to announce that at this time it appears the iboats forums posting pictures function is working once again. Though we cannot promise for how long, we're hoping for indefinitely.
Hi all
We have a 1999 model year Force 75 and there is some milky stuff on the plugs, so I am looking for some help diagnosing this.
Here is what led up to me checking plugs:
Skiing the kids at WOT and on the return trip with the second teenager the engine dropped power to what felt like 2/3...
Hi All
My current set up is:
2006 Maxum 1800 SR3
Mercruiser 4.3l MPI, 220hp
Alpha 1 Gen II, 1:81 gear ratio
Mercury Bravo 1 prop, 48-831912 24P, 4 blade stainless
Max RPM = 4450 rpm @ 52 mph (on boat speedo)
I tried a bunch of props and have been happy with my Bravo 1, except I want go...
Hi All
I am trying to find a tower mounted Bimini for my Maxum 1800 SR3 with a Roswell tower.
I know Roswell makes one, but I cant justify over a grand for a bimini!
I have the original one for the boat, but it won't fit as it is too wide to pass through the tower.
Any suggestions would be...
Hi All
I started to do the alignment on my boat today (Finally!), and I have a couple concerns. (By the way this is my first time doing this!)
I have been tweeking the engine up and down, and I find the sweet spot where the alignment bar goes in and out with two fingers, but then I turn the...
I have an aluminum dock on legs that is 4' wide by 30' long, overall.
I am thinking about using some whips for my boat, 2006 maxum 1800 SR3, which is about 20' long with the swim platform.
Can I safely use the whips on my dock, or am I asking for trouble? Any thoughts on attachment methods...
I just installed a new 21p High Five prop on the weekend.
My concern is that the prop seems to slip a lot on holeshot. wack the throttle and it jumps up to 4000rpm right quick, almost like the vent holes were open.
I changed the prop blind under water.
Could I have put something together...
Hi all
I am looking at a used Merc prop, and it comes off a Merc Optimax OB, and I want to put it on an alpha 1 gen 2.
Is the Flo Torq 2 hub the same for both, or do I have to change the hub out of the prop?
Thanks for the time!
Hi all
I am hoping you can help me make some decisions about prop choice.
Current specs:
2006 Maxum 1800 SR3
Mercruiser 4.3l MPI, 220hp
Alpha 1 Gen II, 1:81 gear ratio
Mercury Bravo 1 prop, 48-831912 24P, 4 blade stainless (I don't know what all the numbers mean except the 24 pitch)
Max RPM =...
Hi All
I am having some trouble with my lower unit oil reservoir.
I have some theories, but I will set the stage first....
2006 Maxum 1800 SR3
2006 4.3L MPI, Alpha 1 Gen 2
-I followed the service manual for draining and refilling the lower unit
-Drained and cleaned the reservoir, I used a...
I am seriously considering getting some smart tabs for our boat.
We have a 2006 Maxum 1800 SR3, Mercruiser 4.3L MPI with 4 blade SS prop, Wake tower, and extended swim platform.
Here are what I am hoping to achieve in priority order:
1) Reduce the size of the wake for slalom skiing. (will get...
Hi All
Got the engine winterized today and thought I would check with you all on wether I got it all correct.
Boat is a 2006 Maxum 1800 SR3, Merc 4.3l MPI, Alpha 1.
Here is what I did in order: (stabilizer already in full tank)
- Change oil (didn't take as much as it was supposed to)
-...
Hi All
I bought a used boat this summer and the depth gauge just blinks zero.
It has a through hull transducer, and once it showed the depth, but promptly started showing incorrect numbers.
Does anyone have any idea what could be wrong?
There was a gap in the sealant on the bottom of the...
Hi All
Got a stern drive boat this year, and want to make sure I winterize properly. I have had outboards all my life and this is different (obviously)
I have decided to dry store it, aka drain and leave it.
I have a 2006 Mercruiser 4.3l MPI with the single drain point, and an Alpha 1 Gen...
I have a couple older O'brien boards. One Player, and a demented, I think.
I ride right foot forward, and most others ride left forward. Do I have to flip the bindings each time or is the board symetrical front to back, so it doesn't matter which way you ride?
Looking at the board it looks...
I am hoping to find out if a 2004 Tracker 115 hp engine by mercury marine is a rebadged Mercury, or if it is totally different?
If not mercury, how are the engines in general? I have a Force right now, and have had great luck with it, but it is time for a bigger boat. I have found a Tahoe Q3...
Hi all!!
I am considering buying a used Tahoe Q3 with a 115 HP Tracker O/B motor.
The boat looks great, but I am wondering if anyone can tell me about the motor? It is made by mercury, but is it just a rebadged merc, or is it totally different like the old Force motors (which I have right...
Hi there
I did a search on this, but can't find any specific info, so here is my questions.
How soon should I get water flow from the telltale at start up?
There seems to be a bit of a delay that I don't remember it having.
When I start the engine in the water the water doesn't start to flow...
Hi All
The controls for a '99 Force 75 are very stiff to work.
When shifting from neutral to forward or reverse it shifts very smoothly and then the control moves forward quite a ways very easily, without increasing throttle, and then things stiffen up. Once you get to the point of revving...
This question is two fold.
Is there a cheap way to rig a temp tach just for figuring out rpm's for prop choice?
If not, does this engine take a 20 pin connection to the alternator for tach connection? I have read this for most of the larger force motors but haven't found any info specific to...
Hi All
I am in the process of getting my borther inlaw's boat ready to go in the water, and I am all set, except the tilt will not work.
When the boat was put away last fall the tilt worked fine.
When I hit the trim button to go up the pump runs and sounds like usual, but nothing happens...