Search results

  1. Honest Tony

    Only goes 20 MPH

    FIXED IT. I took off the exhaust risers down to the Y Pipe both shutters were toast. So I took off the exhaust Below off and looked into the whole system with my Borescope and found all the pieces and used air to blow them to where I could get them with a piece of wire. But it back together...
  2. Honest Tony

    Only goes 20 MPH

    I have 1 on each side 2 total
  3. Honest Tony

    Only goes 20 MPH

    Also that diagram of exhaust only shows 1 Flapper my boat has 2 one on each side.
  4. Honest Tony

    Only goes 20 MPH

    I am sorry but/ After I replaced the impeller I did put it in the water and it did not heat up but would not go over 20-25 mph so thats when I replaced dis cap rotor / sparks plugs and oil change, and has not been back in water since this was done. Because now fixing exhaust hope to test it...
  5. Honest Tony

    Only goes 20 MPH

    I pulled the elbows and both the flappers are toast gone so I pulled the tube that connects the exhaust to the outdrive (Bellow I guess) and one of the flappers was in the tube going back to the motor and the other one was stuck up in the outdrive finally got it out with a piece of coat hanger...
  6. Honest Tony

    Only goes 20 MPH

    I looked on You Tube but all of them are replacing with rubber tube is Exhaust tube just like the stock one?
  7. Honest Tony

    Only goes 20 MPH

    Can you send me a picture of that not sure what you are taking about.. Appreciate the help Guys. Thank You I wrench on my own cars just new to Boats. 1941 Pro Street Willys Coupe Blown 383 / 1971 GMC Jimmy Pro Street Blown 350 /1999 Tahoe total custom. Summer driver 2012 CTSV 620 HP Sedan
  8. Honest Tony

    Only goes 20 MPH

    Boat is a 2002 Ebbtide Mystique 2400 with only 230 hours. I have owned it for 4 years.
  9. Honest Tony

    Only goes 20 MPH

    The boat runs fine with the ear muffs (waterHose) on revs up but in the water does not miss just will not go. I replaced the dist cap / rotor/ plugs/ changed oil / But have not put back in the lake since this was done. New gaskets should be here Monday for exhaust. I cleaned exhaust but just to...
  10. Honest Tony

    Only goes 20 MPH

    I took the top of exhaust manifolds off the 4 bolts on top a removed them they looked good. Looks like a tough chore to take the next ones off that go where the Y connect so I am going to clean out vacuum and size down the hose and try to vacuum down to the Y tube and see if anything comes out...
  11. Honest Tony

    Only goes 20 MPH

    How do you hook up a scanner to a boat? I have 3 scanners but they all have the OBll plug in. I changed the oil & filter put new spark plugs cap and rotor on today. I am going to pull the exhaust in the morning and clean it then go test it. I am only 20 minutes from the lake. THANK YOU ALL FOR...
  12. Honest Tony

    Only goes 20 MPH

    So should I repalce hoses? and what are the shutters? Thanks for the help.
  13. Honest Tony

    Only goes 20 MPH

    No I did not a few went out exhaust after I let it cool off and got towed in I fired it to put on trailer. So I need to pull hoses off and clean out?
  14. Honest Tony

    Only goes 20 MPH

    I lost my rubber inpeller on my 2002 Ebbtide 350 Mag MPI. boat got to 215 degrees. I replaced it and took it out boat runs fine but will not go over 20 mph. So I did a compression test and all good 155 - 165. HELP
Top