Search results

  1. W

    Starter Bolt Size

    I assumed the Allen heads were OE. I ended up removing the intake manifold for a better look. Turns out a bit of gasket was interfering with the bolt. Cleaned the threads and gasket and no more problem!
  2. W

    Starter Bolt Size

    I am finishing up a rebuild of a 1993 90 HP Johnson. I am missing a bolt for the starter which attaches at the top corner of the intake manifold. Pics attached. It seems to be a different size and/or pitch than the other 2 bolts. Does anyone know the specs for this bolt. I've searched diagrams...
  3. W

    90 HP main bearing oil supply

    I'm putting my 1993 90 HP back together. On the block there is what looks to be a lubrication fitting for the main bearing - pic attached. Is it for lubrication? I want to be sure the passage is clean but don't know where it leads and can't blow air or cleaner through it. Any insight? Thanks.
  4. W

    2 HP Mate Coil

    Update: new parts installed - runs great!
  5. W

    2 HP Mate Coil

    Thanks all! New coil, points and condenser on order.
  6. W

    2 HP Mate Coil

    My 2 HP Mate ran fine a few years ago, but not used since due to a driveshaft seal leak. I think I have that leak resolved but now can't get it started. Tank and carb cleaned thoroughly, fresh fuel and spark plug, and (I thought) a good spark. Refuses to even think about starting. I pulled the...
  7. W

    Evinrude Mate 2 HP Driveshaft

    Evinrudeparts.ca did not have anything. I took the shaft to a local machine shop to get their thoughts on it. He said welding and machining was an option but the welding would warp the shaft, which I didn't want. He ended up polishing that part of the shaft. It came out great. I'll update the...
  8. W

    Evinrude Mate 2 HP Driveshaft

    Thanks! I'll give them a call Monday.
  9. W

    Evinrude Mate 2 HP Driveshaft

    I'm thinking this might be my best bet.
  10. W

    Evinrude Mate 2 HP Driveshaft

    I'm in Ontario, Canada.
  11. W

    Evinrude Mate 2 HP Driveshaft

    I'm not sure there's room to do that with the impeller right above the seal. I'll have to have another look.
  12. W

    Evinrude Mate 2 HP Driveshaft

    I've been keeping my eye out for a parts motor. When they come up for sale they sell really quick. I may take it to a local machine shop to see what they can do. It has some sentimental value to me so I don't mind spending a bit. What I was really hoping for was a speedi sleeve type repair, but...
  13. W

    Evinrude Mate 2 HP Driveshaft

    I have a 1972 2hp Evinrude Mate. The oil seal below the impeller has worn a groove in the driveshaft. There is also oxidation/surface rust in that area of the shaft. I can't find a speedi sleeve for that small a diameter (10.8 mm). Are there sleeves available for this? Any suggestions? I'd like...
Top