Search results

  1. A

    New Force Owner, No Start Issue

    I have it set .28 WOT while cranking. I've not checked the idle timing. I'm assuming it's the same procedure - while cranking?
  2. A

    New Force Owner, No Start Issue

    So I've rebuilt the fuel pump and confirmed the Key is not sheared. I have the timing set to 28 degrees, however, still no start. It acts like the timing is too advanced. When trying to start, the flywheel only turns a few times then pauses, then turns and pauses. The battery is new with...
  3. A

    New Force Owner, No Start Issue

    Key is good, I have it set at about 31 degrees BTDC
  4. A

    New Force Owner, No Start Issue

    I burned out my starter, got a new one. Put it on last night and it definitely is turning faster. I can get the motor to sputter at WOT while cranking, but won't take off. I'm going to replace the squeeze bulb next, it won't stay firm.
  5. A

    New Force Owner, No Start Issue

    So I bought a boat . . . 1995 Force 120 had a bad stator * replaced stator and trigger * Timed to 30 BTDC at WOT while cranking * 120 psi on all cylinders * Good spark from all 4 coils * good fuel flow * rebuilt/cleaned carbs and replaced float valves NO START - so frustrating. While timing...
Top