Search results

  1. 1

    2007 bf150

    My question is are the hondas hp output similar to the older 2 strokes where the difference between a 150 and a 175 or 200 was mostly in the tune of the engine? thanks in advance for your replies
  2. 1

    Repower

    Currently my built tritoon is running a 1985 150xp evinrude. Looking at repowering to a 4stroke 200hp I have narrowed my search down to the following brands . Suzuki Yamaha honda but still undecided. Any input from those who run or have experience with the above brands would be greatly...
  3. 1

    1985 evinrude 150xp 35amp

    What would cause #3 timing Mark show up in timing light when hooked to #1 coil wire ?
  4. 1

    evinrude e150stlcos

    This motor is on a tri toon I built. It has a 15 pitch 4 blade and as always ran 5000- 5400 rpm took out one day after idling around it ran up to 5200 and slowly dropped to 3000 rpm so I pulled it to a idle took off same thing. Then it started running fine. Next time out ran good for awhile...
  5. 1

    spark issue

    Trying to help a friend out he has a 40355d didn't have spark on bottom cylinder but did on top via timing light test. Finally got flywheel of for a look at the points they didn't look burnt cleaned them any how still no spark. Any help would be greatly appreciated
  6. 1

    hub kit

    Im looking for a hub kit for a stainless steel predtor prop for a 1985 evinrude 150.
  7. 1

    1985 150 XP reglue magnets on flywheel

    I was able to pick up a whole ignition system . Stator,flywheel,power packs,timer base,coils i noticed one of the magnets was lose not cracked . I want to reglue them . What epoxy do i use ?
  8. 1

    july 4th

    Happy independence day fellow pontooners
  9. 1

    fuel consumption

    How much has it improved over the years? cross flow vs looper? looper vs fict? fict vs etec ? I believe the old rule of thumb was horsepower x10% equals gallons per hour. does this still hold true?
  10. 1

    1985 150 XP intermittently firing

    Model # e150stlcos compression is good on all cylinders carbs rebuilt fuel pumps working good. I have intermediate firing on one side then it had none. Was at the lake on vacation was able to get a power Pack the next day after installing it it acted up for just a moment then all was fine the...
  11. 1

    1985 150 XP evinrude

    When a cdi box is going bad will it be intermediate or go all at once. I can be un way then it will cut back to three cylinders for a moment then pick back up. Is this did box going bad or should I be looking for a bad connection.
  12. 1

    hydraulic steering seastar hk4200a-3

    What adapter kit do I need to install the sea star hk4200a-3 to a 1985 evinrude 150?
  13. 1

    1985 150 XP

    Modle # e150stlcos this motor hasn't ran in years like 10 or more new fuel lines,rebuilt carbs compression 90psi on all but the lower left as looking at the back of the motor it's 85. bro removed duel pumps added. New stats ,new impeller took it out on lake test today and would get up around...
  14. 1

    is there a difference in gear oil

    Whats the difference in lower unit oil and reg 80/90 85/90 gear oil? yes we are talking about manuel gear case not elec shift.
  15. 1

    electric shift or cable

    Model # 125el72r
  16. 1

    a beautiful day

    Happy easter fellow tooners .
  17. 1

    evinrude 6hp

    Im looking at a kicker motor and have found a 11/98 6hp mod# e6rl4eem . I understand this to be a 4 stroke my question is are they any good? anyone here have experience with one? it's currently remote steer I'll probably change to tiller what years will fit this?
  18. 1

    what year is this mariner

    689 s 105998
  19. 1

    rebuilding carbs

    Whats the best way to remove and install the soft plug covering the jets? what's the best tools to use on this ? any helpful tips besides making sure everything is clean ?
  20. 1

    1985 150xp vs 1979 175

    I have both of these motors im going to put one of them on my tritoon. my question is which is the better motor? both have good compression. I'm bypassing the bro on the 150xp . I know there is someone here that has experience with both motors your input would be greatly appreciated.
Top