Search results

  1. crankbait cowboy

    1972 Starcraft Nova

    I am sorry that is page 37 about the middle of "1973 starcraft ss restore in progress"
  2. crankbait cowboy

    1972 Starcraft Nova

    page 73 of my thread "1973 starcraft restore in progress" shows what and how i did my floor with 3m80. I am very happy with how it all went down and turned out. hope this is helpful
  3. crankbait cowboy

    Looking for advice / 16 supersport

    Mod EDIT: Not permitted
  4. crankbait cowboy

    1973 starcraft ss restore in progress

    all righty then, change of plans it looks like. the admiral and I are going to trudge on this summer and try to get this project closer to finished. next up is to finish the side panels, install consoles, and on to the bow area. stay tuned, as with the admirals help, we may just get this back...
  5. crankbait cowboy

    1973 starcraft ss restore in progress

    It is with a heavy heart, that due to life getting in the way, it does not look good for me to finish and splash anytime soon if at all. Long story short, the C word landed in me, shortly after my last post, which put me on the sidelines for quite some time. I am on the mend, and today cancer...
  6. crankbait cowboy

    My First StarCraft; 1975 18' SuperSport

    definitly a big help, looks like a good idea and easy to see what you did. much appreciated and great unit youve built. mucho impressed classic
  7. crankbait cowboy

    1973 starcraft ss restore in progress

    thanks mattsteg, ill keep that in mind and have to play with it a bit. hello budski, hoping for fall, and still looking for power, as i moved the 1974 115 johnson i had in mind. ( no tilt /trim). my work is in agricultural inputs so only about a week from long hours to get the crop seeded and...
  8. crankbait cowboy

    New Journey

    i may be late to discussion, MN, but yes i needed 2 sheets for transom on my 18 ft ss, ( seeing as i did not want the factory wings, but one solid piece )
  9. crankbait cowboy

    1973 starcraft ss restore in progress

    i hear ya Mattsteg. my 1/2 inch will also let me pull it into place. my issue is after i epoxy it 2 coats, i want to foam and vinyl. if i dont have it holding its curve independant of being fastened, when i vinyl then bend, my vinyl will be wrinked not smooth.
  10. crankbait cowboy

    1973 starcraft ss restore in progress

    thanks for the input gang, i got some things to try, and will keep you posted as to what works and doesn't for me. On another note i did get my bottom panels carpeted.
  11. crankbait cowboy

    1973 starcraft ss restore in progress

    i hear ya, reserector. im also tossing around the idea of using 3/8 hyfax (poly) material.( the kind you find on snowmobile skies or portable fish houses. heating it , clamping it any thoughts?
  12. crankbait cowboy

    1973 starcraft ss restore in progress

    Classic, how do you get it to keep the shape while you put on the several coats? thanks guys, yes those relief (kerf) cuts may be the way to go, but thinking i may try 1/4 inch birch , soak 24 hours, heat it up, clamp it on for a few days, and then laminate 2 pieces together to make it 1/2 inch.
  13. crankbait cowboy

    1973 starcraft ss restore in progress

    Update: I sprayed my bow uppers with h20 to get them wet , and then clamped them in place on boat, with the idea of leaving them 10 days , they would form to the bow, as the old were. That is not at all what, took place, as they did not form at all. plan b is to soak them in the tub for 20...
  14. crankbait cowboy

    1973 starcraft ss restore in progress

    Still chipping away at er , here in the bitter cold north country. I cut my upper side panels ( plan is to foam and vinyl them) and used adhesive to put in carriage bolts to bolt to boat ( I went plenty long so as to have something to attach my wiring to out of sight) also adhesive applied to...
  15. crankbait cowboy

    1979 Starcraft 16’ SS Refresh

    looking good Mose, its nice to see your to do list. mine has changed a bit over time, as i found its best to have an order of things to do , which keeps from putting " the cart before the horse " so to speak and having to backtrack.
  16. crankbait cowboy

    1973 starcraft ss restore in progress

    I got my side panels of consoles completed this weekend cut carpet / applied henry 663 adhesive to flat side / rolled with roller and let sit overnight under weight / stretched over edges and stapled with air stapler / screwed on from metal side with 1/2 inch screws
  17. crankbait cowboy

    1973 starcraft ss restore in progress

    yes, not one of my prouder moments seeing as this build will have taken me close to ten years. with way to many interuptions along the way. some beyond my control and sorry to say some a fault of my own. i do plan to splash her, and hope i can get it done in next 18 months or so. being part...
  18. crankbait cowboy

    1973 starcraft ss restore in progress

    i got 2 coats of clarkcraft 1;1 epoxy on my side panels with 4 coats on the ends. hoping to get them carpeted this weekend.
  19. crankbait cowboy

    New Journey

    congrads MN. yep, if a man likes hotdish, and all the other support a good admiral provides, then a bit of give and take goes a long ways. good on you both for it working out !
  20. crankbait cowboy

    1973 starcraft ss restore in progress

    after a much to long hiatis, i am getting back at it. the boat is in storage, but i have been working on the consoles this past weekend primed with self etch / painted with hammered black rustoleum/used 3m 90 adhesive to apply vinyl, removing end trims first to have some mechanical hold power/...
Top