Search results

  1. M

    1991 Johnson 30 hp no spark

    I started the engine this spring for a checkup and clean up everything was fine, then I tried to start it yesterday, and had absolutely no spark. I disconnected the kill switch and it still had no spark. the engine has the under flywheel ignition system, my question is what sould be the...
  2. M

    1970 4hp cowl seal

    Hello, I need a new seal for the cowl of my outboard, the part (#0314095) is NLA. Is there something else that would fit ?
  3. M

    1970 johnson 4 hp compression ?

    I got this outboard with an other outboard I bought, it looks pretty rough from the outside, the compression is around 90 psi is it within acceptable range ?
  4. M

    NS 40C Year ?

    Hello, I just bought a NS 40C in need of some care as a winter project, it's serial is 361 a- 1 66551. Where I can know the year of this outboard, and what years should be compatible for part ? thanks
  5. M

    Honda BF5A running rough

    I have a honda 5 hp 1997 that's running rough at idle and mid range. I changed the oil in the engine, lower unit, put in a new spark plug and fresh gas. I also checked the compression at wot (throttle rod disconnected and pulled) I raised quickly in a couple of pulls to 150 psi. After running...
  6. M

    which lower unit fit on a 1987 yamaha 30hp

    will a lower unit from a 1988-2002 30 hp fit on a 1987 30 SH 3 cyl. The yamaha part catalog show a specific part number for 1987 year, an other for 1988-1994 and an other one for 1993-2002 thanks michel
  7. M

    1991 johnson 8hp idle adjustement

    My outboard is running a little bit too fast at idle, how I sould adjust the linkage to reduce the speed ? by unbolting the throttle cable bracket from the cylinder and rotating it a couple of turns? also how should I adjust the idle mixture (top screw on the left side of the carb) right now...
  8. M

    1974 mercury 20hp ( 200 model ) won?t start

    I?m trying to repair it for a friend. The story : the engine died while in use on a lake, it never started again. Since this time 2 mechanics tried to repair it without succes. The facts : Fresh water outboard with low hours 120 compression on both cylindes When I remove the spark plugs I...
  9. M

    Yamaha enduro 60 reliability ?

    I'm looking to buy a boat with this engine is it a reliable engine for use in cold weather condition like late season duck hunting when the temperature is below 0 celcius. I do not has the exact year of the engine but by looking at it, it's has approx 10 years. the engine is grey with gold and...
  10. M

    1982 mercury 25 hp good or bad ?

    i'm looking to buy a 25 hp of this year( not sure) I don't have serial # yet, but from the decals it's around 1982. <br /><br />is there something special to look at ?<br /><br />is 500$ us too much?<br /><br />the engine is clean and in good working order it's a short shaft with remote...
  11. M

    lower unit parts interchange 1978 7.5hp

    will a lower unit from a 1979 9.8 fit on a 1978 7.5 hp <br /><br />thanks <br /><br />michel
  12. M

    9.9 powerhead identification and part interchange

    I have a evinrude 9.9 CD ignition power head wich suffered from bad water recovery. It need crink,con rods and pistons. to find these parts I need to identify the year of my powerhead(I have heard pistons and some other parts were different from 1977-1981 and 1981-1989) is there a way to...
  13. M

    model identification B at the end?

    hi, I just bought a evinrude 25 hp model E25RCNB I know the meaning of everything in the model number except the B at the end.<br /><br />what this letter mean?
Top