Search results

  1. C

    Tune Up Specs 1973 Johnson 50HP 50ESL73R

    I will try to do that Saturday. Weather is supposed to be good. I would really like to get this going. It is a lot of fun when it works. :)
  2. C

    Tune Up Specs 1973 Johnson 50HP 50ESL73R

    Jimmbo, that was my thought as well. In my experience, those can be difficult to diagnose.
  3. C

    Tune Up Specs 1973 Johnson 50HP 50ESL73R

    Update. The spark plugs look good, compression is good (160 165), both coils throw a 3/8" spark, and fuel flow looks good. All remain unchanged from a week ago. So I figured fuel flow. Borrowed a portable outboard tank. Had the wrong fitting, so I bought a hose barb from the hardware and...
  4. C

    Tune Up Specs 1973 Johnson 50HP 50ESL73R

    Jimmbo, that is pretty much what I was thinking. Planning on taking it from the top tomorrow. The weather report looks OK, only 20% chance of thunderstorms. Would love to take it for a cruise tomorrow evening.
  5. C

    Tune Up Specs 1973 Johnson 50HP 50ESL73R

    Racerone, I hadn't considered the flywheel key. It was running full power and just fell on it's face all at once. Water pump impeller is new. Fuel pump is new. Thanks on the compression. I'll try to check the flywheel key tomorrow. Edit: Sorry, forgot to mention the overheat alarm. I...
  6. C

    Tune Up Specs 1973 Johnson 50HP 50ESL73R

    Nordin, dropping a cylinder was my first thought too. But it didn't sound any different as far as being smooth. It didn't sound like it was missing, it was just down on power. I checked the spark earlier this summer, and got 3/8" on both cylinders with my adjustable spark gap tester. I...
  7. C

    Tune Up Specs 1973 Johnson 50HP 50ESL73R

    Yes, it is a built in tank. I drained it as best I could earlier this summer. I put a couple gallons in it, and it was running quite well a week or so ago. Then yesterday it fell on it's face. I am OK with trying a different tank. I'll see if I can borrow one somewhere.
  8. C

    Tune Up Specs 1973 Johnson 50HP 50ESL73R

    I should be able to check that tonight, if the weather holds off here in mid Michigan. This boat sat for the last couple years due to outside issues. This summer we wanted to get it back out. I rebuilt both carbs with new floats, drained the gas and put in fresh. Replaced all the lines...
  9. C

    Tune Up Specs 1973 Johnson 50HP 50ESL73R

    So yesterday was very disappointing. My tach still doesn't work, but I borrowed an optical tach from work and took the boat out last evening. Leaving the dock, it was running great for about 100 yards. Then it fell on its face. I didn't GPS it, but probably not over 5mph. Working the choke...
  10. C

    Tune Up Specs 1973 Johnson 50HP 50ESL73R

    Got it. I'll let you know what I find out. Thanks so much for the help.
  11. C

    Tune Up Specs 1973 Johnson 50HP 50ESL73R

    Both 14x9 and 14x11 look relatively inexpensive and available. Would the current WOP RPM give any indication as to which one would be a better choice?
  12. C

    Tune Up Specs 1973 Johnson 50HP 50ESL73R

    OK, that motor was on some kind of smallish speedboat before I got it. I think it was about a 15' trihull maybe. Not sure about that. But I didn't change the prop after I got it running, I never really thought about it. I'll try to get a WOT RPM soon.
  13. C

    Tune Up Specs 1973 Johnson 50HP 50ESL73R

    Jimmbo, the prop is 13-3/4 x 15. I am not sure when I will be able to get the WOT RPM. Does that prop sound OK for a pontoon?
  14. C

    Tune Up Specs 1973 Johnson 50HP 50ESL73R

    I don't know if they are mixture adjusting screws, or air bleed screws, but both carbs have a screw that definitely affects idle quality. As far as timing, I have no reason to think that it is out, but there is a way to check it, and I just wanted to make sure it was 'right'. What 'right'...
  15. C

    Tune Up Specs 1973 Johnson 50HP 50ESL73R

    I'll check both for a good manual. Thanks. The tach wasn't working the last time I had it on the lake. I need to check it out and see what that problem is. The prop I can check when I get home this evening. Does 14mph on that boat sound right?
  16. C

    Tune Up Specs 1973 Johnson 50HP 50ESL73R

    Hi Guys. I have read a great deal on this forum, but I don't have a lot to contribute. I am still learning how different outboards are from automotive engines. I have googled a lot trying to find out the tune up specs for this engine. It is running OK at the moment by finding specs in...
  17. C

    1973 Johnson 50ESL73R very low power

    This motor is severely lacking power at anything more than 1/3 throttle. This is what I have done. New spark plugs, stator, rectifier, timer base with sensor, cleaned and adjusted carbs, cleaned and inspected fuel pump, replaced all fuel lines & bulb, and has fresh gas. Timing is perfect...
  18. C

    1970(?) 120hp worth rebuilding?

    I bought a 120hp Chrysler model 1207HA S#4997 from an auction. Two of the cylinders are scuffed and would need to be bored and new pistons, but the top cylinder is actually cracked. About 1-1/4" to 1-1/2" in from the cylinder head. So two questions. 1. Can a cylinder be welded and bored? (I...
  19. C

    Johnson 50hp bog out and die above half throttle

    It is a 50ESL73R It was (supposedly) rebuilt a few years ago. When I first got this engine it ran great for about 20 minutes. Then it started losing power at higher throttle settings. Now it will bog out and die above about 1/3 to 1/2 throttle. It will start and run fine at idle and high...
  20. C

    120hp 1970(?) Wires to connect to start

    I bought a 120hp Chrysler model 1207HA S#4997 from an auction. It has Magnetron ignition with points. All I got is the motor. I put it in a barrel and tried to start it but no spark. I checked out the points and was getting no electrical contact across them. Cleaned them up and they appear...
Top