Search results

  1. R

    Lower unit drive shaft wobbles

    Is this a normal thing. Changing W/Pump and noticed a lot of sideways play in the shaft. Thanks RFish
  2. R

    1994 Johnson Trim & Tilt noisy rattling

    Trim operates fine oil topped off - Just makes a rattling sound as it is raised or lowered. Before replacing motor looking for advise maybe not motor and bearing instead.<br /><br />Thanks in advance
  3. R

    OMC/Johnson/Evenrude Question

    Is there any years that I should stay away from in re-powering with a 200-250 Johnson etc. Would like to use Johnson so my controls will still work.<br /><br />Going from a really great but well used 235 looper to something equivalent.<br /><br /><br />Any help would be appreciated - Trying to...
  4. R

    200hp Non-EFI voltage regulator/stator

    I am having trouble with the yellow wires from the stator heating up on my 200hp 1994 NON-EFI Mercury engine. I have swapped the voltage regulators and the problem follows the regulator. I have also replaced the regulators and the wires still heat up. Is there any way to test these with a...
  5. R

    Oil still flows to gas line engine off.

    When my engine is off and sets for 1 or 2 weeks it appears that the oil injection still pushes oil into the gas line as evidenced by a lot of smoke at startup and if I pull the enrichment valve hose from top carburetor I see almost pure oil. The longer it sits the worse the problem. I have...
  6. R

    POPPET VALVE QUESTION

    Should I be able to blow through the poppet valve hose with the engine off?<br /><br />(Hose attached to the poppet valve still mounted on the engine.)<br /><br />Mercury 200hp V6 1994 carb <br /><br />Thanks<br /><br />RFish >()> :)
  7. R

    I RESENT THE INSINUATION!!!!

    I RESENT THE INSINUATION!!!! THAT MY POST WAS ANYTHING OTHER THAN WHAT IT WAS. A LINK TO MERCURY’S SITE TO SHOW A NEW MERCURY ENGINE I POST HERE ALL THE TIME I SIGN IN WHEN I DO IT AND DON’T HIDE. NEXT TIME BEFORE YOU ACCUSE ANYONE OF SOMETHING YOU NEED TO GET YOUR FACTS STRAIGHT. MY ONLY...
  8. R

    MERCURY VERADO ON THERE WEB SITE

    MERCURY VERADO ON THERE WEB SITE 200, 225, 250, 275 HP<br /><br /> http://www.mercurymarine.com <br /><br />RFish >()> ;) ;)
  9. R

    SECONDARY SER# 1994 200HP MERC?

    Anyone know where the secondary serial number is located on this engine? I thought saw that it was somewhere on the starboard side of the block any ideas as to where as I did not want to have to take off the packs to check under them.<br /><br />Thanks
  10. R

    What is the correct way to check reed valves on Merc 200HP

    Can anyone tell me the correct way to check the reed valves on a 1994 200hp MERC carbureted engine.<br />1. Running at idle<br />2. warmed up <br />3. pull bleed hose.<br />4. plug in PSI guage.<br /><br />Im am only getting 1-2 psi with a lot of pulsation.<br /><br />Should all ports read...
Top