Search results

  1. Kamdyn

    2006 F40 Yamaha (4stroke)

    Guys I need help, Okay here's my issue: I think my motor is idling to high because when I try to put it in gear it thumps. So I am looking for the idle screw with no luck finding it? Is there a diagram for my motor and if so where can I find it?
  2. Kamdyn

    1975 140 Mercruiser wont go in Neutral

    I have a 140 Mercruiser on my Glastron and the shifting is a little rough, I get a thump when I put it into reverse or forward and sometimes it will go into neutral. Any help is gladly appreciated.
  3. Kamdyn

    Yamaha 2006 F40 (Hardstarting)

    Before starting I make sure the vent is open and the ball is firm, And when I turn the key the starter only turns half way and thats it. But when I turn the throttle to give it some gas an then turn the key voila she fires up. My question is that normal for an electric start motor. I used to own...
  4. Kamdyn

    Glastron Trailer

    I have a 1975 Glastron which I will be needing a trailer for it, Does anyone know what will be the perfect fit. Its a 16'7'' and the breadth is 83'' and the depth is 41''.
  5. Kamdyn

    2006 F40 Tiller (Did not want to start)

    I was at the launch today and did not leave the dock for about an hour until she finally fired up, I checked to see if it was fuel/battery issues but that was good, I turned the key and the starter turned the flywheel about a quarter turn but did not want to fire up. Any troubleshoot tips that I...
  6. Kamdyn

    Battery Selector Switch Question

    Hello to all my fellow boaters:-) I am charging 2 batteries on board with my outboard motor and the positive from the outboard connects to the com. Also the trolling motor positive connects to the com in the battery selector switch. My question is would the outboard motor with a 20amps charging...
  7. Kamdyn

    2006 f40elh

    Just bought a 40HP Yamaha Tiller model,Just wanted to get some feedback on this particular motor. I cant wait to get it out on the water when the lakes thawed out.
  8. Kamdyn

    1979 Glastron (Weight)

    Can someone give me a rough estimate on the weight for a 1979 Glastron with a 140 Mercruiser? I am looking to buy a trailer if this helps.
  9. Kamdyn

    1997 25 Johnson (3Cyc)

    Yesterday I drained the float bowls on all 3 cyclinders and I noticed when I tightened the screws it will not get tight but it turns, This is the first motor that I noticed that it has a gasket on the screws. Do I need to replaced the gasket or can I take it off so the screws will be tight?
  10. Kamdyn

    Oil from Prop

    I have a 1997 25HP Johnson and I noticed after pulling the boat out of the water yesterday that there were yellowish oil on the prop. I wonder if water is getting in to the lower unit or the prop seal needs to be replaced. I recently change the lower unit oil and it was milky any help is gladly...
  11. Kamdyn

    Wire Diagram for Battery Selector

    Hey Guys, Currently I have my trolling motor running off the battery in the front compartment, and when thats dead I swapped it out from the one in the back compartment. I want to wire both batterries together with a battery selector so I can hit a switch and make life a little easier, I am...
  12. Kamdyn

    Motorguide Warranty

    I have a 3 year warranty with motorguide and I had to pay a warranty center because someone repaired it and it voided the warranty,I spoke to the marina that I bought the motor from and they said they do not work on trolling motors,Now I am left with the bill. I"ve called motorguide consumers...
  13. Kamdyn

    Motorguide Wireless 65lbs Thrust

    I've had no problems for 2 seasons, Now I ran into a communication issue with the foot pad and the trolling motor. Its working on and off and it beeps like crazy, I"ve replaced the battery in the remote and made sure my deep cycle battery is fully charged but still the same problem.
  14. Kamdyn

    1997 25 Johnson (3 Cyclinder)

    I was playing with the throttle linkage (Screw) and it seems like I got more power, I was wondering If it will damage the motor If I leave it that way.
  15. Kamdyn

    1997 25 Johnson (3Cyl)

    I've been running this motor for awhile now and am trying to figure out why its burning alot of fuel, I've had different motors of all sizes and bit of experience fixing them and would like some help with some troubleshooting steps.
  16. Kamdyn

    25 Johnson 3 Cyclinder

    I have a 25 Johnson (1997) motor which was just bought and I replaced the plugs and fuel filter and also changed the gear lube. My question is I have a hard time firing it up, But when its warmed up It starts up no problem. I had the same issue today at the boat launch so I replaced the plugs...
  17. Kamdyn

    1997 25 Johnson 3 cyclinder

    I was wondering whats the recommended heat range the plugs should be? Also is there a standard pitch prop for this motor?
  18. Kamdyn

    40 Yamaha 3 Cyclinder (2 Stroke)

    Guys do you know where I can download a manual for my motor? I have a 40 Yamaha MHLT
  19. Kamdyn

    Fouling plugs

    My motor is fouling plugs like crazy, Is it safe to say that going with a hotter heat range will solve my plug issues. As of right now I am using the recommended heat range for my motor BR7HS-10. The mechanic installed a hotter plug is that good or bad? And he also adjusted the carb. Thanks for...
  20. Kamdyn

    Yamaha 40 MLHT

    Hey guys I am trying to figure out what year is my motor. On the sticker it reads: Yamaha 40 MLHT 6H4 L 490475 Y
Top