Search results

  1. Fiat4Fun

    What is this wire hanger called and where can find a replacement?

    cool, that gives me the direction to go.....J hanger, who would of thought of that ;-)
  2. Fiat4Fun

    What is this wire hanger called and where can find a replacement?

    Thanks for the replies. Just trying to match the six others that run down the side of the boat. The aluminum strap had a hole and screwed in to the gelcoat. I just thought it would be a simple find, but I can go grab some aluminum strips at the hobby store and make some. I do use cable ties on...
  3. Fiat4Fun

    What is this wire hanger called and where can find a replacement?

    Thanks for the replies, looking for OEM looking replacement, something that is metal and can be a "hook" like what is still in there.......
  4. Fiat4Fun

    What is this wire hanger called and where can find a replacement?

    One of these broke off on my 1986 Chris Craft. It's a wire hanger inside the starboard side of the boat where the cables run? Not sure what it's called or where to find one. Any advice is appreciated.
  5. Fiat4Fun

    End of Season oil changes?

    Curious what interval folks recommend for older Mercruiser 260 with Alpha One? One mechanic says yearly, other one says every 50 hours...... Different thoughts on a 1986 boat,,,,,, I assume doing the engine and outdrive at the same time is good practice, depending on what interval you buy...
  6. Fiat4Fun

    1986 Mercruiser Alpha 1 Power Steering fluid?

    Wanted to clean out the power steering fluid in my old 1986 boat. Was planning on just ordering up some Quicksilver Fluid 858975!Q01. I assume that works for old boats? Any other recommendations or thoughts? Was just going to use a a siphon to pull out the fluid in the plastic tank and refill a...
  7. Fiat4Fun

    Trim Gauge troubleshooting.......

    Well, I did get some time to check it out. The one gauge seems like it acts normal. I made sure the wire is good from the motor/sender connector to gauge is good. The wire off the engine is black with white strip. The wire at the gauge is Purple. I did noticed with testing with a meter that...
  8. Fiat4Fun

    Mercruiser Prop Hardware question?

    Very helpful, Thank you ;-)
  9. Fiat4Fun

    Trim Gauge troubleshooting.......

    Cool, will check out the link, thanks,,,, The gauge is a VDO, but the wiring looks the same, I will try testing the gauge Thanks
  10. Fiat4Fun

    Trim Gauge troubleshooting.......

    Ok, well today I got my meter out, ran a test wire to see if the butt connectors at the motor to the trim sender were good. They look fine. I was able to turn the sender to get a different reading at the butt connectors at the motor. One wire went to ground at the engine, the other wire was find...
  11. Fiat4Fun

    Mercruiser Prop Hardware question?

    Cool, that's what I did. It just surprised me to see the new prop come with a different style insert and lock nut retainer after all those years of playing with the star retainer.........
  12. Fiat4Fun

    Trim Gauge troubleshooting.......

    Finally got around with playing with the trim sender. I tried to turn it mounted on the outdrive, no changes. Removed it from the out drive and tried turning it, not changes. Just pegged in the up position. Any links or ideas on haw to trace down the sender wire? Any other advice is greatly...
  13. Fiat4Fun

    Mercruiser Prop Hardware question?

    Howdy, Ok, I know I am old, but did Mercruiser change the hardware on the sterndrive props? I got a new prop with a new hub kit, and the insert is shorter than the "brass" one that came off and the nut keeper is different, the old one was a "star" and the new one has two tabs.... Mercruiser part...
  14. Fiat4Fun

    Trim Gauge troubleshooting.......

    Howdy, Working on my 1986 Chris Craft Scorpion with a 260HP Alpha One. A few years back, I had the transom done and been using the boat and slowly getting things "back together". So now I am working on the trim gauge. I thought I would ask for some things to check before I dive in. A couple of...
  15. Fiat4Fun

    1986 Chris Craft gas gauge or sender issue?

    Finally got it figured out. The VDO gauge has a small nut on the ground post that holds the spade on. The nut had come loose, which made the ground flaky. Once I went in a tighten it all was good. The wiring was intact and I check for shorts. When the ground on the gauge was "loose", it would...
  16. Fiat4Fun

    1986 Chris Craft gas gauge or sender issue?

    I did read the old sender before taking it out, and was getting "flaky" readings and it was a last replaced 15 years ago. It was the old cheesy arm type, so since I already pulled it out I replaced it with the newer style VDO version. The gauge connections were hard to get to unless I removed...
  17. Fiat4Fun

    1986 Chris Craft gas gauge or sender issue?

    Well, I pulled the fuel gauge, and used the old sender on my work bench and it wall worked perfect. SO, it has to do with the wiring in the boat. Will start going through that. But at least I don't need to get a new gauge and try to match it with the other ones ;-)
  18. Fiat4Fun

    1986 Chris Craft gas gauge or sender issue?

    Finally got around with checking the boat gauge. I did replace the old school sender with a new style VDO sliding sender. Same issue. The gauge stays on full. IF I unhook the pink cable at the sender, the gauge goes to empty. IF I un hook the ground cable at the sender, it goes to empty. SO I...
  19. Fiat4Fun

    1986 Chris Craft gas gauge or sender issue?

    Had an interesting issue come up last time on the water. When we went out for the first time, our gas gauge looked like we had under 1/8th of a tank. So, the next time we went out, I put in 30 gallons of gas ( 60 gallon tank). However the gas gauge reads full. Could this be a bad float in the...
  20. Fiat4Fun

    Fuel treatment question.....

    Thanks for the feedback. I have had this boat up here with me since 2008, did not know it had a fuel shut off, so will not drain the carb. I don't drain the carbs on my sports cars for winter, but I do run my snowmobiles dry ..... Do you use regular Sta-Bil or the marine stuff?
Top