Search results

  1. M

    Prop for Evinrude V4 crossflow

    I have a hard time finding a prop for my 1982 Evinrude V4 90hp crossflow. I am looking for a 23 or 25 pitch prop. Currently running a 21P alloy but I am over 6000rpm at +45mph. Anyone know of a good search? ( on a '70s English 16ft boat)
  2. M

    Gearcase interchangeability

    I was already afraid of that. trim brackets are not interchangeable either?
  3. M

    Gearcase interchangeability

    I have a 1969 Johnson V4 no trim and hydro electric shift. And a 1982 Evinrude v4 90hp with a bad engine. (broken cylinderring and took out the piston and bore.) Could I make the 115hp engine block work on the gearcase of the Evinrude? Or could I switch over the trim to the 115hp.
  4. M

    '69 johnson hydro electric shift V4

    I said, WHEN they honed the bore, there will be a thicker o-ring needed. But it is less likely that it is honed. Like I said, I will take a look into fixing next week!!
  5. M

    '69 johnson hydro electric shift V4

    If that is the case, it will most likely need a thicker o ring. Going to take apart the engine next week, so we will see.
  6. M

    '69 johnson hydro electric shift V4

    I am currently in my exams as electro-mechanics but I will keep updates on what I find when I take the lower unit apart. Given the location and weather, that is going to be a day job. Thank you all so much for your input!
  7. M

    '69 johnson hydro electric shift V4

    My suspect was the wrong type oil, but clearly there is more. I am just a 20 year old, trying his best to get this old motor going again and save it from the scrap as this is what everyone around here would do. Parts have to be imported from the US. No mechanic wants to work on these motors...
  8. M

    '69 johnson hydro electric shift V4

    I guess the plane tickets would be more expensive then what I payed for the engine. :-))
  9. M

    '69 johnson hydro electric shift V4

    I am, as soon as I have the time. Why don't you come help me haha
  10. M

    '69 johnson hydro electric shift V4

    The previous owner had the engine get serviced by one of the few boat repair shops we still have in this country. They replaced the gear oil with the standard gearcase oil, and I think that started all the problems. Even in our boat club, barely anyone knows of these hydraulic-shift engines...
  11. M

    '69 johnson hydro electric shift V4

    It did have a lot of metal shaving in the gearoil last time. Big chance that screen is partly or complete cloughed up. Thanks for the advice!
  12. M

    '69 johnson hydro electric shift V4

    I will surely follow up on post 14. And I thank you very much for your input. The more info I can get on this the better. You never can have to much know how. Certainly if you don't have a lot of experience on these old engines, like me.
  13. M

    '69 johnson hydro electric shift V4

    then there is surely something wrong with mine. I tried this when I rebuild it, it took constant turning to have a slight bit of the clutchdog on the gear
  14. M

    '69 johnson hydro electric shift V4

    How do I test the shifting when the gearcase is of the motor?
  15. M

    '69 johnson hydro electric shift V4

    It is shifting fine on the trailer. Looking at the clutchdog and gear, it looks like it is not engaging all the way. no, it is just strait wiring from the switches to the solenoids. I reduced my idle speed to almost stalling to be as gentle as possible on the clutchdog.
  16. M

    '69 johnson hydro electric shift V4

    Is my controller a Evinrude one?
  17. M

    '69 johnson hydro electric shift V4

    Is the thing in the center no°10? I will have to remove the inputshaft and then that part will come out?
  18. M

    '69 johnson hydro electric shift V4

    That looks way different then mine. I have the switches in the controller. I cleaned the controller, and they seem to work well. Out of the water, it switches perfectly everytime between forward, neutral, reverse. Apart from that, the engines works fine. I am soft when docking so rarely need...
  19. M

    '69 johnson hydro electric shift V4

    Is there a way to measure the pressure?
  20. M

    '69 johnson hydro electric shift V4

    yes, I did a partial rebuild twice, Got already a fair bit of money in this engine, and yes she is old, but she always starts, runs well over 45 mph. And I am not giving up so fast on this electro shift. Here is the serial number: 115ESL69E B1583 I live in Belgium, Here in Bruges, a city of...
Top