Search results

  1. E

    ign switch has voltage on kill line

    i am curently trying to figure out why i have no spark on my 94 sport jet 90 i found that i have 265mv on the kill line going to the switchbox is this ok or will it kill the swichbox ?
  2. E

    no spark on my sportjet 90

    :confused:Hi everyone .my problem started last summer one day when my 94 searayder was started one morning after a long crank time it was run for a good 45 mins after the long crank start and it ran great it shut down normal and wasnt used the rest of the day . the next morning the first thing i...
  3. E

    63 to 70 lower unit switch?

    i have a 63 65hp 4cyl and a 70 65hp 4cyl will the lower units switch ?
  4. E

    1985 capri 1500? to heavy?

    I have a 85 bayliner capri with a 1963 65hp merc on it .the motor starts and seems to run fine just wont plane out boat . I weighed the boat and trailer and it was2000 lbs is this to heavy? waterlogged? the boat was stored outside uncovered for a few years .is there foam or somthing that can...
  5. E

    1963 65hp timming marks?????

    I have a 65hp that runs ok in the driveway with muffs has 140's compresion on all 4 cyl's but on the water it wont go over 10 mph its mounted to a 15 ft bayliner capri. It has a green flywheel and I canot find any mark for the timming on the wheel or block or on the 4d magneto pully .I want to...
  6. E

    compression readings good?

    just bought a 1970 65hp off ebay and was told it had low comp (but it had tilt/trim which i wanted) i tested it dry and cold and got 40 in 1 and 65 in 2 so i stopped and put a little oil in all 4 cyls and spun it for a while to clear the oil out retested and now have 135,145,148,135 are these...
  7. E

    63 65hp merc shifter

    new to merc outboards and have a 1963 65hp merc i just bought motor and ran it in a tub ran fine but was told to change impeller so i did it was hard put lower unit back on and i had it in reverse i think wont shift out of reverse now what positsion should shifter be in?lever on motor forward or...
Top