Search results

  1. M

    05' Johnson 150 throttle

    I have a question about my Johnson 150. When I manually put the throttle arm in WOT and I manually move the cam roller, I get about a 3/16" gap between the cam on the throttle rod and the cam roller on the throttle linkage. Does this mean the throttle plates aren't fully opening? Is the cam worn...
  2. M

    87' John 110 water leaking from lower unit

    I have an 87' John. 110 that we put a used lower unit on with a new water pump. When we have the ears on it and start it up water leaks out of the mating surfaces of the lower unit, the pitot holes, where the shift lever comes through the mid section, ect. We dropped the lower unit again and put...
  3. M

    87' John 110 lower unit w/pitot

    I just replaced my lower unit that did not have a pitot for the speedo with one that does. I have the ears on and when I start the engine waters streams from the pitot. 1) Is this normal? 2) Does it need to be pluged? Thanks
  4. M

    87' john. 110 water coming from lower unit

    I have an 87' johnson 110 that I just replaced the lower unit on. There is a port on the back that water is pouring out of. My old lower unit didn't have that. I also have poor water pressure at the gauge which improves when I put my finger over that outlet where the water is pouring out of...
  5. M

    87' johnson lower unit compatible with 1 84' -90hp

    I have a 87' johnson 110 that I want to put a lower unit onto from an 84' 90hp. It appears the same except the 84' has a short rubber tube in the upper back piece. Does anybody know if they are compatible?
  6. M

    johnson lower unit bearings

    87' johnson 110 - When replacing lower unit bearings do the thrust washers need to be replaced with the thrust bearings?
  7. M

    Johnson 110 water pump won't pump

    I just replaced the water pump on my 87' Johnson 110. It was fairly straight forward, however it doesn't appear to be working. I have no stream coming fron the tube. My ears only fill on one side, could this be the issue or do I have to drop the lower unit again and start probing. It is possible...
  8. M

    87' 110 lower unit compatible w/ 92 115

    Does anybody know if a 92' Johnson 115 lower unit is compatible with an 87' 110?
Top