Search results

  1. C

    yamaha c115 hp engine failures

    Has anyone seen many c115 in the 1996-99 have piston failures causing the complete powerhead to be destroyed.I have seen 2 engines blown up in the last month with low hours on each one,about 300-400 hrs.
  2. C

    emergency pull start on 2002 90 hp ficht

    Is there any way to pull over a 90 hp ficht if the battery goes dead,wondering if there is any thing available for emergency starting ,since the flywheel is covered.JUst got this engine used and would like to know if anyone can help.Thanks
  3. C

    oil injection pump on 2002 90 hp ficht,PLEASE HELP

    Does Any One Know If The Oil Injection Pump Should Click When The Key Is Turned On,this Engine Is Not Getting Oil,i Had To Replace 2 Pistons,i Dont Want To Run It And Ruin It Agian.now That I Have It All Together,i Want To Make Sure It Is Injecting Oil.if I Pinch Off The Return Hose And Crank It...
  4. C

    2002 90 hp evinrude ficht

    this engine was given to me,however it had a knock in it,when I stripped it down it had lower starboard and upper port pistons scored severly,other 2 cylinders and pistons are fine.I have the pistons to replace but am wondering why only 2 clinders and pistons were damaged,seems like an oil...
  5. C

    should I get A 21 or 23 pitch prop

    I have a1998 yamaha c115 hp with a 19 pitch prop, at wot I am running 6000 rpms and 45 mph.I feel this is to high for the rpms,I think the max is about 5500 rpm for this engine is this correct?I feel a 21 will may be drop my rpm,and give me more speed.does any one know if this wouldbe a good...
  6. C

    which prop would work for me

    What is the max rpm range for a 1998 C115hp 2 stroke.I am running a 19 pitch prop but at wot my rpm is up to 6000 and speed is 45 mph.I know I need more pitch ,would a 21 pitch bring me down to the correct rpm range,is the max rpm 5000 or 5500.Does any know how much does rpm decrease by each...
  7. C

    honda trim guage,to justintime

    the wires on the trim guage are black- ground,black/yellow and yellow/ black.also on a honda tach I have 3 wires black- ground,gray and black/yellow which is 12v and which is for tach signal.on the yamaha red is 12v and green is tach ,is this correct.Thanks Chris
  8. C

    help with trim guage

    I have an Honda guage in my boat,and have installed a 1998 c115 yamaha,can some tell me how i can hook this gauge to this engine.The guage has 3 wires as most guages,how and which way can I put them together.Chris
  9. C

    honda tach wires

    can someone tell me what the wires on a honda tach are for.they are gray,black/yellow and black.I figure the black is ground ,what I need to know is which is for 12v and which is for the tach signal.Thanks Chris
Top