Search results

  1. A

    Valve clearance? Volvo 3.0GS Petrol

    Hi, I'm in the process of re-building a 1997 Volvo 3.0GS, but after hours of searching can't find the valve clearance figures. Can anyone point me in the right direction? Thanks a lot :)
  2. A

    Volvo Penta 3ltr petrol engine replacement

    Folks, (Mechanic) friend just been offered a very good deal on a Larson bowrider with a Volvo Penta 3ltr engine. The engine has seized. The owner says that he put it away last year, went to use it this year and it wouldn't turn over. The head has been off with engine out of the boat and still...
  3. A

    What model TinyTach for Tohatsu 50hp?

    Hi guys, I have just bought a brand new Ceasar Thundercat (Similar to Zapcat) with a new Tohatsu 50hp 2stroke carb 3cylinder I want to install a tacho so I know what RPM i'm running at. Can anyone recommend me what model TinyTach I need, since it's a 3 cylinder? Here's the link to the models...
  4. A

    Canopy frame attachment - Replacment, where? (Pic)

    When taking apart the frame for my canopy the last day, the end attachment (secured with allen bolt) that you use for securing the frame to the boat slipped off, and fell into the water - A gonner. Does anyone know where I might find a replacment? See pic below of what i'm talking about. It's...
  5. A

    Honda 90HP 4stroke oil filter....

    Hi guys, Is the Honda 90HP 4stroke oil filter the same used in the Honda engines? My local boatshop is closed today and need to change the oil on a friends engine. Of course the guy doesn't have the manual, any ideas what oil I should be using? Semi or fully synthetic?
  6. A

    What props have I got? (Volvo Duoprop)

    Hi guys, Currently running a Volvo KAD32 with duo props. The problem is that she should be achieving 3700 - 3900RPM WOT but i'm only getting 3000RPM, i'm obviously over pitching. The only code I could find on my props was A5F 854778, which was on the forward prop Can anyone shed some light on...
  7. A

    Buying Volvo Penta KAD32 - Advise/tips?

    Hi guys, Not strictly RIB related. I am going to inspect a boat next week, which I intend to buy. There is a Volvo KAD 32 diesel (Super and Turbo - 170HP - 2001) installed. Is there anything in particular I should be looking out for? Any known faults with the engine? The supercharger has been...
  8. A

    Alpha 1 Gen 2 - Grease points

    Hi guys, I have an Alpha 1 Gen 2 (installed new 2005) on my boat. When I went to grease all the nipples on the stern-drive, the only nipple I could locate was the gimbal bearing one. In the manual, it show's 2 more nipples for greasing the hinges (I think). What am I missing? I am almost...
  9. A

    Alternatives to "Quicksilver High Performance Gear Lube"

    Hi guys, Here in Ireland there is no local Mercury dealer so I can't buy the 'proper' gear oil. Can anyone give me an alternative? What grade gear oil should I use?
  10. A

    Mercruiser 2.8 D-Tronics 165HP Diesel - Any opinions?

    Hi guys, I'm currently looking at a Mercruiser 2.8 165HP (Crank) D-Tronic Turbo Diesel (2001) Does anyone have any opinions/experience with these? I currently have the Merc 1.7DTI and I know that these engine are full of problems, eventhough ive been lucky and my 1.7 goes like stink, I don't...
  11. A

    Changing oil on a DF90

    Hi guys, A friend of mine has an Adventure RIB with a DF90 on it. Today he said a beeper started beeping (didnt say whether it was constant or intermitant). He said that in the manual it says that the beeper will sound when it's due an oil change 1) Where is the oil filter? I couldn't see it...
  12. A

    Tell tale on Mercruiser inboard?

    Not a problem as such, but... I have a Mercruiser 1.7 diesel inboard with an Alpha one Leg My main concern is that I am always paranoid that the raw water system may not be pumping (Although I know it is, as the engine never overheats). It's just paranoia I know, but when I had an outboard I...
  13. A

    Woe's since installing S/S prop

    Also forgot to mention... The original alum prop had a Flo-Torq hub installed like this one: http://url.ie/1uc The stainless steel one has the type of hub where there is a plastic ring around the perimeter of the hub. This actually kind of worried me because I had to use a spacer on the side...
  14. A

    Woe's since installing S/S prop

    Hi everyone, I have a Mercruiser 1.7 (120HP) Turbo-Diesel on my sports cuddy with an Alpha 1 Gen II leg It came as standard with a 14 x 23 aluminium prop, but was over-revving, so I upgraded to a 14.25 x 24 stainless steel prop. I fitted it up nice and tight. Nothing is loose, there is no play...
  15. A

    Johnson GT10 Recoil starter BROKE - Help!

    The recoil on my pull start Johnson GT10 wasnt pulling the rope back in, so I decided to have a go at opening it. When I opened it (To no surprise) the spring went everywhere. Does anyone know where I could buy a recoil assembly? I've checked eBay to no avail. The type I need is the assembly...
  16. A

    What does this konb do? (Johnson GT10)

    I got the lend of a Johnson GT 10 to use for the weekends, but she won't run. When I pull her, it runs for about 10 seconds and cuts out. I think it may have to do with the knob in the picture below. I'm guessing its the air/fuel mix because its goign into the carb? Can anyone confirm this...
  17. A

    Mariner 90 4Stroke - Reliable?

    Hi guys,<br />I'm thinking of buying a baot with a Mariner 90HP 4Stroke fitted. I was wondering what your opinion on the engines are? Are they reliable? Any known issues? Fuel consumption etc.<br /><br />If you have anything to add, please feel free!<br /><br />Here is a picture of the engine in...
  18. A

    Valve on outboard fuel tank broke

    Hey guys,<br />I have an external 25l plastic tank with my Yamaha 75HP outboard. Recently, the valve on the tank broke... You know the valve on the tank, that has the tube that goes to the bottom of the tank, the whole assembly can be removed with 4 screws.<br /><br />Can a replacment part be...
  19. A

    'Valve Clearance' - What is it?

    Forgive my stupidness, but before I recently bought my BF90 4Stroke, everything I had was 2stroke.<br /><br />A recent term that has been coming up is 'Valve clearance'. What exactly is meant by this term? (Is it the exhaust/inlet valves on the head?) And how does someone go about altering it...
  20. A

    Oil filter for Honda BF90 4Stroke...

    I need to service my BF90 4 Stroke tomorrow...<br /><br />With all this talk that 'its just a civic engine with a prop' I got to thinking.. Can I use a filter from a motor factors for a Honda Civic, or do I have to get a special one from my marine dealer?
Top