Search results

  1. U

    Trying to find correct prop for motor

    Yea that's what I figured thanks.
  2. U

    Trying to find correct prop for motor

    OK I think I found one. Will I just need the prop and a nut? It seem like I'll need more. From this diagram: https://www.marineengine.com/parts/mercury-outboard-parts/8/0a197112-thru-0d280999-usa/gear-hsg-prop-shaft-design-i it shows a thrusthub, spacer, prop, spacer, nut. Anyone dealt with...
  3. U

    Trying to find correct prop for motor

    I have a I think 89 mercury 8hp. I’m looking for a prop for it. I bought it without a gear case so I bought a gear case for it and can’t figure out what I need next to get a prop on it. The first picture is the gear case I bought for it. The second is a close up of where the prop goes on. I know...
  4. U

    1977 Chrysler 10hp 100HA cowling

    I need a cowling for 1977 Chrysler 10hp 100HA. Any ideas where to start looking? Do cowlings from other similar years/models work too? Thanks
  5. U

    1977 Chrysler 10hp 100HA exhaust cover specs

    Thanks!
  6. U

    1977 Chrysler 10hp 100HA exhaust cover specs

    Does anyone have torque specs and tightening sequence for the exhaust cover on this motor? I've replaced the 2 gaskets and plate once and its leaking on me. Should i use permatex? Thanks for reading
  7. U

    1977 Chrysler 10hp 100HA exhaust cover specs

    I bought a new cover so it should be good but I'll check it.
  8. U

    1977 Chrysler 10hp 100HA exhaust cover specs

    Woops! I was working on a Johnson too got them mixed up. Thanks.
  9. U

    1977 Chrysler 10hp 100HA exhaust cover specs

    Does anyone have torque specs and tightening sequence for the exhaust cover on this motor? I've replaced the 2 gaskets and plate once and its leaking on me. Should i use permatex? Thanks for reading
  10. U

    1960 johnson 75hp V4S-12 starter

    I'm in northern California. The model number of the starter is autolite mdw-4103m. I called Arco and they couldn't find anything. I don't know much about rebuilding starters hopefully that's not my only option.
  11. U

    1960 johnson 75hp V4S-12 starter

    I'm looking for a starter for a 1960 johnson 75hp V4S-12 and am not having much luck. Are there newer aftermarket starters that would work? I saw one for a mercury that looked very similar. Thanks for reading.
  12. U

    1978 Johnson 9.9 service manual?

    Anyone got a pdf of service manual for 1978 Johnson 9.9hp. My model number is 10rl78m. Thanks.
  13. U

    Metal on metal noise when pulling starter rope

    Engine got ran without oil for about 3 minutes at high speed. Engine died and I tried to start it again before realizing I forgot oil. After that happened I hear a screeching metal on metal noise when I pull starter rope. I took off cylinder head cover and cylinder bore is not scratched. I...
Top