Search results

  1. B

    Engine alignment problem

    I am in the process of putting a new (to me) motor in my boat. I have the motor mounts and coupler from my old engine on the new engine. The problem im having is in order to even get the alignment tool to slide into the couple i had to have the front adjusted nearly all the way down. Its now...
  2. B

    Adding power steering

    Re: Adding power steering Alright, I have purchased the engine and got a few pictures. Two are of my boat and how the steering currently is and one is the actuator. If more info or pictures are needed to tell if this is a possible add on let me know. Thanks
  3. B

    Adding power steering

    I have a 1976 Searay 240. It is need of being repowered. The boat currently does not have powersteering, but an engine I am looking at comes with a complete set up. Pump lines and ram. With everything there is it something that can be set up on my boat?
  4. B

    Can I swap a 233 for a 188?

    From what I have read the 188 will bolt up no problem. I have also read that the gear ratios are the same for both motors. My only concern is the loss of 35hp. Will I notice any big differences? The reason I am planning this swap is that I have found multiple 302s reasonably priced and the 351...
  5. B

    Pre alpha lower unit on alpha outdrive?

    Is this swap possible? The only differences Ive found are the spring pin on top of the vertical driveshaft (which Ive read wont be a problem) and the alpha lower unit has a bearing retainer nut I guess you would call it and the pre alpha doesnt appear to have one. Thanks
  6. B

    Riser cross reference

    What is the difference in a 76351 and a 76351a2? And are they interchangable? Ive searched the internet for the last few hours and have decided to seek the answer here. I have a 76 sea ray with a merc 233. Thanks!
  7. B

    How to pressure check my block..Mercruiser 233 (351w)

    Im looking for detailed instructions on how to pressure check my block..I tore the top of the motor off and couldnt find any cracks above the lifters where they would normally show. The oil is getting water while running which suggest cracked block but I hate to buy a new motor until i am...
  8. B

    1976 233 Merc starter question

    I just bought a 1976 srv with a 233 merc.. I suspect the starter is bad. The boat will crank over but it seems stressed, and as soon as the boat wants to fire once the starter will kick out. This makes it extremely hard to get the boat to start with the starter disengaging every time. I pulled...
Top