Search results

  1. yacine

    Impeller challenged...?

    running the engine for 5s or 7s will not damage the new impeller as long as it is lubed and the engine is not running max rpm. make sure the muffs are as tight as possible and the water pressure is at its max flow. if you see water coming out of the little nipple on the impeller housing, that...
  2. yacine

    no gas in the fuel line before and after the pump

    can somebody answer please!! Thank you
  3. yacine

    Impeller challenged...?

    Hi, Yes from the transom to the thermostat inlet. That way you will see water flowing if there is water. Here is a little tip. When you start thw engine, have someone press the muffs to seal completely around the intakes and make sure the hose is turned on at full capacity to have the max...
  4. yacine

    Impeller challenged...?

  5. yacine

    Impeller challenged...?

    It seems like if it was running dry for some time. I would put a transparent tube from the transom to the engine to make sure that there is water when the engine is running and most importantly there no bubbles. If you do not see water, try revving the engine a little bit for a couple seconds...
  6. yacine

    no gas in the fuel line before and after the pump

    Hello boaters!!!! My name is Yacine. I do I have a 1989 OMC 584APRMED 5.8L Stern Drive. The engine is a V8 Ford 351 5.8L. I rebuilt it recently last summer. runs perfect on my driveway and I used a timing gun to set it to about 9 BTDC, which was the sweetest spot for my engine. but hesitates on...
Top