Search results

  1. C

    2450 Bayliner Galley Table mounting hole location

    I have a 1988 Bayliner 2450 Ciera and I am looking to install flush mount pedestal base in the cabin. I have seen this arrangement in many boats of this type in the past. The question I have is does anybody have the spec where I should drill this 2 1/2" Dia hole that will be about 3" deep?<br...
  2. C

    Exhaust Flappers--which way to mount

    I have 1989 Bayliner 24' Cruiser with 5.7 liter sterndrive. The thru hull exhaust (above water line) is equipped with rubber flappers on the exhaust. Which way should they open? Should the open end be down (ie opens upward) or the open end be on the top side (ie opens downward)? or possibly...
  3. C

    Compression Test--45 , 45 and 45 on 85HP Force URGENT

    I am getting ready to purchase on line a used 85HP Force outboard to replace the outboard on my boat.<br /><br />I had the person do a compression check for me and he got values of 45, 45 and 45. I know the values should be around 125 to 130 per cyl. <br /><br />QUESTION: Is his values valid...
  4. C

    Wanted Used 1985 85HP Force Motor

    I have blown the top cyl (completely fried Piston and cylinder--metal everywhere inside), on my 85 HP. Mechanic says it is not worth fixing. Does anyone have a 85 Force outboard with engine in good condition?? Other parts such as lower unit and starter etc etc can be salvaged off of my unit...
  5. C

    Damaged 1985 Force 85 HP for sale

    Is anybody interested in buying a 1985 16' Bayliner Cuddy Cabin boat. Boat is in good condition with trailer. Motor needs rebuild as 3rd cyl (top Cyl) is fried. All other components on the outboard is good including the lower unit. Outboard is a 1985 85 HP Force Engine.<br /><br />Any...
  6. C

    85 Force Outboard Motor "locked-up"

    I have a 1985 Bayliner with a 85 HP Outboard Motor. It has run well for over 3 years. All three cyl seem to have alway had good compression. Recently, the motor has locked up. The starter would not turn the flywheel. I took all three spark plugs out and rotated the flywheel by hand, then I...
Top