Search results

  1. M

    1991 Phantom SST II 186- aluminum or fiberglass?

    I am considering buying a 1991 Phantom 186 and was wondering if it is fiberglass or aluminum?
  2. M

    1996 Mercury 115hp-How to bypass the oil pump

    I would like to bypass the oil pump and mix my own oil into the gas tank. Are there any descriptions out there on how to bypass the oil pump? I have seen two other similar motors ruined because the oil pump quit working. Thanks, mac
  3. M

    Fisher 186 Hawk w/2003 Mercury 115 EFI

    My brother is looking at buying a 2003 Fisher 186 Hawk with a Mercury 115 EFI fourstroke motor. I told him I would check into a couple questions he had on iboats. Are there any known problems or trouble areas with this particular motor? He's having a mechanic look the boat over today....what...
  4. M

    1979 Mercury 150 lower unit

    Will a 1979 Mercury 150 lower unit work on a 1994 Mercury 115 powerhead?
  5. M

    Mercury 115 hp running poorly-update

    Update..... I pulled and cleaned all the carbs and replaced the fuel filter. I tested spark and compression and both seem good although spark plug no. 4 looked completely clean (no oil or carbon residue). The spark plugs were new about 3 months ago and have at most 15 hours on them. I checked...
  6. M

    Butterfly valve at WOT

    I recently noticed that at WOT my butterfly valves only open about 1/3 of the way. I looked in my manual for clarification but could not find any info. Is this normal? Thanks, Pete 1994 Mercury 115hp
  7. M

    To rebuild or not to rebuild?

    I recently inherited a 2004 115hp Mercury which has two bad cylinders. My question to the forum is how much work is involved with rebuilding this engine, and approximately how much I would have to invest in parts. When the previous owner checked with local repair shops, no one wanted to touch...
  8. M

    Mercury 115 hp engine problems

    I have a 1996 Mercury 115 hp motor. When I purchased the motor (used) it seemed to run well for me. Over the past year I have noticed only at WYT it would bog down or cut out, but if backed down slightly it would run fine. Last weekend this problem became much worse and I seem to have...
  9. M

    Mercury Shift and Throttle Assembly

    I have problems with the mercury shift and throttle assembly breaking in boats. The piece that keeps breaking is inside the shift assembly and is made of cheap pot metal that is soft and breaks easily. I have replaced two shift assembly's in our work boat, one in my personal boat, and helped a...
  10. M

    1974 Renken Cuddy Cabin

    I am looking at buying a 1974 Renken Cuddy Cabin. The add says it is a Renken, but I can not find any info on the web for this boat. Is it likely a Reinell? Does anybody have more info on this boat? I've talked to the guy and he inherited it and knows nothing. How much does this boat weigh...
  11. M

    Battery Box with step

    I am looking for a marine battery box that is sturdy enought to function as a step. Has anyone seen one before? I have found some for automotive purposes but they do not encase the battery. I have looked at building a external support and step, but I am afraid it will look shoddy. Any...
  12. M

    Seasonal lower unit swap

    I have just recently purchased my first boat! The boat is a 1981 Hewescraft River Runner with a 115hp Mercury (early 1990's) that has been converted to a jet. I purchased this boat with the intent of using it mostly in the fall for hunting on the river but have recently rediscovered how much fun...
  13. M

    Swapping lower units

    I have just recently purchased my first boat! The boat is a 1981 Hewescraft River Runner with a 115hp Mercury (early 1990's) that has been converted to a jet. I purchased this boat with the intent of using it mostly in the fall for hunting on the river but have recently rediscovered how much...
Top