Search results

  1. C

    Oil dripping from front water outlet at the top of lower unit.

    I posted another picture of the oil. It’s black and I’ve never seen gear oil look like that
  2. C

    Oil dripping from front water outlet at the top of lower unit.

    Pretty sure it wasn’t gear oil. I check the fluid and it didn’t have any water in the oil and it wasn’t over full or low. It doesn’t stink either. I’m thinking it’s just unburnt mixture
  3. C

    Oil dripping from front water outlet at the top of lower unit.

    Pretty sure it wasn’t gear oil. I check the fluid and it didn’t have any water in the oil and it wasn’t over full or low. It doesn’t stink either. I’m thinking it’s just unburnt mixture from running it on a barrel. I’ve heard it’s common
  4. C

    Oil dripping from front water outlet at the top of lower unit.

    So I know this question is asked a lot but I have a 1997 90 HP2 Stroke Mercury Motor. I just replaced water pump and ran the motor in a barrel. I noticed a few days later this oil dripped down on the tool box under the motor. The hole it’s draining out of was plugged up until I cleaned it out...
  5. C

    Nitro bass boat leaning pulling

    Thanks for the input. I knew they all needed to be trimmed up but I’ve been in several boats and never had one pull and lean if you didn’t. From what I’m seeing the 17.5 ft Nitros and others have this issue because of prop torque and other things
  6. C

    Nitro bass boat leaning pulling

    Hey y’all. I have a Nitro LX140 1997 model boat. When on pad if I don’t trim the motor up the boat will start veering to the right. If I turn left to try to correct it the boat will start leaning to the left. If I trim it up it will level off and ride perfect. Just curious if this is normal from...
Top