Search results

  1. BB63QM

    LU 1655-7332 Parts Diagram?

    Update: I bought a full 850 for parts, and scavenged the LU first. All I did was swap the LU from the “new” motor onto mine, and replace the gear oil. Then I took it out. Once on the lake, it appeared to be fine for about 2 minutes, then lost 80% of its thrust…we pushed ahead and managed to...
  2. BB63QM

    LU 1655-7332 Parts Diagram?

    One man’s trash is another man’s treasure. Found one on eBay, with frozen prop, but seller has not yet confirmed the model number.
  3. BB63QM

    LU 1655-7332 Parts Diagram?

    Thank you all for the replies. Sorry for the typos, brodman. Here’s the situation: I bought new gears for my “new” ‘73 Mercury 850 based on the parts list for my serial number, only to then find that my LU is not OEM. Instead, it is part1655-7332 (which alldodge correctly pointed out is...
  4. BB63QM

    LU 1655-7332 Parts Diagram?

    I have yet to understand what the shims do or why they are needed, but understand that they are necessary, except where they are specifically stated as not being needed do to changes in the design of the LU in the 80’s-90’s (I saw a note but I don’t recall where) First things forst, I either...
  5. BB63QM

    LU 1655-7332 Parts Diagram?

    I’m sorry…I don’t understand. I don’t see 1655-7332 on the page indicated (or anywhere in the Mercury catalog for that matter), which is why I’m asking here.
  6. BB63QM

    LU 1655-7332 Parts Diagram?

    Does anyone have a parts diagram for lower unit number 1655-7332, which is on my 1973 850 Thunderbolt? Spec’s part is 1655-7333, so perhaps mine was made with leftover parts or got a replacement in the last 50 years. Anyway, time to replace the gears, so need part numbers (I ordered for the...
  7. BB63QM

    Prop Locking Question (Reverse Locking Cam?)

    Ok. So after replacing the dog and slide and reinstalling the gears (recall that the replacement gears didn’t match; they were for the oEM lower unit/carrier), we took the boat out Saturday. Started right up. Idled out fine, got up on plane fine, then we slowed down and when we sped up again...
  8. BB63QM

    Prop Locking Question (Reverse Locking Cam?)

    I am in CA; my assumption is that the IL6 and IL4 were the same in that era. Can you point me to the part diagram for the unit you have?
  9. BB63QM

    Prop Locking Question (Reverse Locking Cam?)

    This is my current plan (meanwhile, I’ll run on the prior LU with updated dog and slide). If anyone has or knows where I can find mid 70’s IL4 gearcase on the cheap, let me know.
  10. BB63QM

    Prop Locking Question (Reverse Locking Cam?)

    Thanks,Chris. I was hoping blindly that you knew… I’ll stand pat for now…and ask the boat guru at the local shop next time I’m there. Near as I can tell from the internet, there is no performance difference between straight and curved gears, just a longevity difference (curve gears last...
  11. BB63QM

    Prop Locking Question (Reverse Locking Cam?)

    Can someone please respond to this? The interchangeability seems logical to me, but I am hesitant to go solo on this. My assumption is that so long as all the internals match internally, are cross identified as being appropriate for the model, and fit, then they are interchangable. If not...
  12. BB63QM

    Prop Locking Question (Reverse Locking Cam?)

    I went ahead and ordered the 850 carrier and bearing, just in case…seems to me to be a more solid design so I’m hoping it is interchangable.
  13. BB63QM

    Prop Locking Question (Reverse Locking Cam?)

    Correction…in the 850 version the reverse gear has a ball-bearing set and corresponding recess in the carrier; in the 800 version, the reverse gear does not, and rests instead against a rough and pitted end of the inner side of the carrier, or a pad of gear oil in the gap between the carrier and...
  14. BB63QM

    Prop Locking Question (Reverse Locking Cam?)

    Also another question: in both versions, the reverse gear does not ride on bearings (as does the forward gear on its tapered bearings)…this seems to be an odd approach, having the reverse gear’s friction only reduced by gear oil, and I suppose balance, as the shaft itself rises 2 sets of...
  15. BB63QM

    Prop Locking Question (Reverse Locking Cam?)

    HELP!!! I ordered and received new gears, a new slide, and a new shiftcam, BUT then found that the gearbox in use is NOT the gearbox from and 850 but instead appear to be from the 800 (or later model 70-80-90), so it looks like some of the parts that I bought will work, but others don’t match...
  16. BB63QM

    Prop Locking Question (Reverse Locking Cam?)

    HELP!!! I ordered and received new gears, a new slide, and a new shiftcam, BUT then found that the gearbox in use is NOT the gearbox from and 850 but instead appear to be from the 800, so it looks like some of the parts that I bought will work, but others down match. 760394-Shiftcam—Same...
  17. BB63QM

    Prop Locking Question (Reverse Locking Cam?)

    For those that are following along: I found the culprit. It seems that the Clitch slide (30624) snapped (this is the part that sits between the clutch spring and the clutch pin). This led to the sporadic failure to get into gear and getting stuck in reverse, and may or may not have contributed...
  18. BB63QM

    Prop Locking Question (Reverse Locking Cam?)

    Thank you, both. I’ve been fortunate so far that everything comes apart well (it’s possible that this is not the original LU (there is a slight mismatch in the mating surface at the forward tip), so I don’t think I’m working against 50 years of age and neglect…just 20 or so. Looks like I’m...
  19. BB63QM

    Prop Locking Question (Reverse Locking Cam?)

    Carrier removed without damage (though the gear that was supposed to be attached was not). Problem identified (assuming that the gear fell off during removal)…the clutch dog is swedged on all teeth, front and back, and of course so are the locking grooves in the forward and reverse gears. So...
  20. BB63QM

    Prop Locking Question (Reverse Locking Cam?)

    Ominous advice, but maybe spot on. At this point, I’m hard pressed to get the carrier out…the puller from Oreilly’s isn’t long enough to straddle the prop shaft and it’s not slipping out like they show in the repair manual and how-to’s online. So if I can’t figure this much out, replacing worn...
Top