Search results

  1. F

    E15REOD idle

    Okay fair enough. Thank you !
  2. F

    E15REOD idle

    Okay another update. I replaced the impeller and ran it in the test tank. Very strong stream now from the cooling water outlet even idling while at 650-750 rpm’s. Will fine tune the idle speed to spec on the water in the next few days.
  3. F

    E15REOD idle

    Okay I checked and it is in place and not loose. Why not just have a sealed passage? I’m curious why there’s a plug? Was it just a decision by the engineers?
  4. F

    E15REOD idle

    Okay I checked and it is in place and not loose. Why not just have a sealed passage? I’m curious why there’s a plug? Was it just a decision by the engineers?
  5. F

    E15REOD idle

    Thank you for linking. I have been focusing my adjustments on 15/2 and 1. What is the function of #17?
  6. F

    E15REOD idle

    Hi all, sorry for the late reply, was working and out of town the last few days. I set the idle mixture back to the factory setting. I went back out in the water and set the idle again. After doing some WOT the engine returned to a normal idle. I could not replicate my original issue. I did...
  7. F

    E15REOD idle

    Hmm I believe it may have something to do with the idle speed knob on the tiller. It appeared broken and that the plastic knob was just spinning freely without turning the mechanism but I wonder if that wasn’t the case. It would make sense why the sudden change.
  8. F

    E15REOD idle

    When you say “idle passage screw plug” are you referring to the small round plug on the air silencer box that gives you access to the idle speed screw?
  9. F

    E15REOD idle

    I will check those things! I haven’t installed a new impeller anytime recently. I always check and there always appears to be a steady stream of water coming from the cooling water outlet. I will try a compression test next! Thank you!
  10. F

    E15REOD idle

    Hi all, I’ve been working on a 1995 evinrude E15 and had some troubles last fall with the idle. Over the winter I disassembled and cleaned the carb and installed the extended idle plugs as the QL77JC were fouling after a few hours as I troll extensively. I took the boat out the other day and...
Top