Search results

  1. D

    92 Yamaha T9.9 won't manual tilt, how to?

    My 92 Yamaha T9.9 won't tilt out of the water manually as it is suppose to do. I have tried greasing and oiling and heat but nothing helps moves this motor up into a tilted position out of the water. I imagine it is salt frozen as the whole motor had to be taken apart and cleaned out to get the...
  2. D

    prop end play too sloppy?

    Can anybody tell me how much end play (slop) the propeller on a Yamaha T9.9MX.. is suppose to have fore and aft, if any? I have 1/8 inch right now and that is with one washer plate behind the spacer in front of the propeller like the schematic shows. The nut behind the propeller has holes in it...
  3. D

    yamaha T9.9MXHR shift rod replace

    I replaced powerhead and found the shifting rod laying on the table. Do I need to remove the powerhead again to get that rod hooked back on up there inside the upper case or can I somehow get it rehooked from below?<br />thank you
  4. D

    more drain holes to prevent salt damage Yamaha

    I've taken my 1993 Yamaha 9.9 outboard completely apart (except the block) to clean out the salt deposits. I found a lot of salt accumulations in the head which I've cleaned out. Then I opened up the upper drive shaft housing and found a whole bunch more salt accumulations that I meticulously...
  5. D

    Lower unit shift shaft boot problem

    Hi. When I drained the gearcase oil I noticed the blue salt-away solution had accumulated inside and the oil itself was very milky. On retrospect, I realize I was probably responsible for the blue fluid as I plugged up the little drain holes while I was filled the thermostat hole with salt-away...
Top