The iboats forum moderators are excited to announce that at this time it appears the iboats forums posting pictures function is working once again. Though we cannot promise for how long, we're hoping for indefinitely.
Does anyone know how to remove and replace the grease tube and fitting on the transom shield for a Volvo DP-SM. My fitting is striped out. It’s 1/4 inch and just falls right out. Is there a special tool to replace the tube? Also does the transom shield need to be removed?
I did all that, even used a spare tank. Same issue. When the boat is popping on acceleration, there is a heavy fuel smell likes it's dumping fuel. I don't think the fuel is leaning out properly. I know I started this thread suggesting it was a lean pop, but after researching and trying to...
I have a volvo penta 5.0 GXI-E 2005. My engine keeps popping on acceleration about 3200 RPM's. Immediately after accelerating it runs great then 5 seconds later it will pop and sputter and I lose speed. Testing fuel pressure at the rail is 44 psi, down to 42 or so when the poping starts. My...
I just replaced the exhaust manifold and risers last year. All my spark plugs look great. The spark plugs don't tell the story of a lean or rich condition. I noticed my temp gauge reading about 150-155 which I believe is cold. I am going to pull the thermostat and make sure it's seated...
Hi, I have a 2005 Volvo Penta GXI-E. My motor recently started popping on acceleration. about 3000 rpms it pops or misfires, and I lose speed. After about a half an hour the popping stops and the boat runs perfect for the rest of the day. I had the injectors cleaned, fuel rail cleaned...
