Search results

  1. B

    Good prop question

    I have a 24ft deck boat 150 ox66 planes out instantly just stays flat and goes i guess because how long my boat is, now im running 5400 rpm and doing low 30s so would it be worth going up 4 on pitch to gain speed loose rpm but i think i will still plane well and maybe save mpg
  2. B

    Part # help

    I need the part # for the black hose with quick connect end that goes from the t/t pump to the foot .alpha one gen 2
  3. B

    Not permitted

    Mod EDIT: Not permitted
  4. B

    Alpha outdrive gear ?

    I bought a boat with no lower part of the outdrive but i found a whole outdrive with different gear ratio if i leave my upper that on my boat and just put the bottom part of the foot will my gear ratio stay the same
  5. B

    how to switch alpha to receive bravo

    my block was cracked and I found a good used 5.7 same year model as what was in my boat a 97 , the only difference is it is set up for alpha and I have a bravo, so what all do I need off the old engine ?
  6. B

    help identify

    can anyone tell me witch 5.7 this is , 0k026694 my boat is a 96_97 so not sure that's the years they changed I believe
  7. B

    will 87 5.0 gm block switch with 98 5.0 block both marine

    both marine motors and the difference i see is the older head have a bigger center water port but the intake on 98 block is solid
  8. B

    adjusting shift cable length at controls????

    I have a new e tec 115hp with single binnacle control my problem is i use about 70 percent of throttle cam from idle to full throttle, i know on older controls you just moved throttle cable to a different cam hole in the controls, but mine doesnt have that, it does have two nuts on top of...
  9. B

    1985 dt 115 suzuki timing and carb settings

    i need the info to set my timing and carbs on my 85 dt 115
  10. B

    1985 suzuki 115 (how to set timing)

    if anyone has the service manual can you post a copy of the page it seems like the link and sync is good.I just need to set timing..thanks......its the 2 stroke 115
  11. B

    how many poles does a 03 johnson 115 have(2 stroke)

    title said it all, thanks in advance.....
  12. B

    good mech read this please

    Im might buy a 2004 150 evinrude. its been winterized and we did a cold compression test , its been setting for 2.5 months, the numbers came all out to 100 all 6 cylinders do you think they would get back to 120 range once i start useing it again
  13. B

    when did sea ray

    when did sea ray start making transoms with composite i might get a 99 19ft sun deck but i dont want it if the transom is wood
  14. B

    transom

    in a 1999 19ft sea ray sundeck with a outboard would the transom be wood are composite
  15. B

    What is the best way to clean rings

    I want to clean my cyl and rings in a 99 optimax 200hp, runs good i just got it and it still hade the same plugs from 11 years ago and ran well!!!! I changed the plugs and noticed some carbon so who has the best way to clean
  16. B

    how bad is this 99 (200hp optimax merc)

    i just bought a 200hp opotimax (1999) we took it to the water and it rode perfect then for fun i did a compression test all are 93psi-98psi SO I KNOW THIS ISNT VERY GOOD BUT IT RODE SO WELL, HOW BAD IS THIS
  17. B

    help please 03 yam 115tlrb throttle cam link

    my service man. says to adj. THROTTLE CAM LINK to 53mm but doesnt tell from what point.(end to end)or(center hole to center hole) and how do i tell if its a (e115a)(c115tr)or all outher it says 115tlrb bellow 6e5 L 1004362 FAMILY 3YMXM1.731CA
  18. B

    2003 yam 115 ????

    what is the little 1/4 hose running out the top mid section and it has a small plug in it and how do i change my lower unit fluid i see the fill but no vent im thinking that hose might be the vent thanks ahead of time
  19. B

    99 johnson 115 rpm ???

    what is the max rpm you should run this motor thanks
  20. B

    2000 yamaha ls 2000 help ????

    i started both eng today and let them run 2 min and the oil on the small lines on top of res never started pumping is this a problem or do they run ritch until they warm up i havent started in about 3 weeks and is there a starting procedure
Top