Search results

  1. oldboatfixerupper

    Stuck water pump impeller

    https://www.amazon.com/Splitter-Damaged-Corroded-Removal-Splitting/dp/B07FNQLF7T/ref=asc_df_B07FNQLF7T/?tag=hyprod-20&linkCode=df0&hvadid=366329556945&hvpos=&hvnetw=g&hvrand=4293288539594492868&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9028024&hvtargid=pla-790720269823&psc=1&tag...
  2. oldboatfixerupper

    Stuck water pump impeller

    Have you tried 2 screwdrivers or crowbars?
  3. oldboatfixerupper

    Strange leak on 9.9 Johnson

    No sir, you do have to release the shifter pin to release the lower unit though.
  4. oldboatfixerupper

    Strange leak on 9.9 Johnson

    It's you water tube leaking. You have to remove the lower unit and while you're at it replace the water pump and grommet. https://www.amazon.com/Evinrude-Johnson-Through-Impeller-Replaces/dp/B07BHTGQT3
  5. oldboatfixerupper

    1974 Evinrude 115hp v4

  6. oldboatfixerupper

    1974 Evinrude 115hp v4

    That makes sense. I'll either be a genius or a big dummy tomorrow.
  7. oldboatfixerupper

    1974 Evinrude 115hp v4

    I actually tried pex at first. The pex didn't work. It didn't seal well and the diameter wasn't as close as this Polaris tubing. It actually does shrink(polaris tubing) and seals well. I tested it first before I started.
  8. oldboatfixerupper

    1974 Evinrude 115hp v4

    I have that water pump setup with the grommets. I bought the engine and didn't think about checking the water flow. I installed the engine on the boat and finally noticed no water flow. I pulled the lower unit and discovered the water tubes severely damaged. So instead of using the grommets I...
  9. oldboatfixerupper

    1974 Evinrude 115hp v4

  10. oldboatfixerupper

    Nobody fishing?

    You're not invited but I'll send you some with uber eats. lol
  11. oldboatfixerupper

    Cleaning water passages Evinrude E150EXERV

    Do this part look more accurate? Is it over heating?
  12. oldboatfixerupper

    Can you use 2 stoke oil in a prestolite, trim pump?

    I think dextron 3 is pretty universal. I would look up your boat and see the correct fluid. Also if you have 2 engines, make sure you use the same fluid. Per google reading.
  13. oldboatfixerupper

    Cleaning water passages Evinrude E150EXERV

    I would try lime-a-way a drill bit and some guitar strings and a case of beer.
  14. oldboatfixerupper

    1974 Evinrude 115hp v4

    Using band clamp and needle nose to reshape water tubes.
  15. oldboatfixerupper

    1974 Evinrude 115hp v4

  16. oldboatfixerupper

    1974 Evinrude 115hp v4

  17. oldboatfixerupper

    1974 Evinrude 115hp v4

    I think swimming pool polaris pool cleaner line will replace the old water tubes. Gonna find out.
  18. oldboatfixerupper

    1974 Evinrude 115hp v4

    Here is the boat I was referring to.
  19. oldboatfixerupper

    Nobody fishing?

  20. oldboatfixerupper

    Nobody fishing?

Top