Search results

  1. S

    water getting into gear lube

    Sorry for the long and bewildering post...Ive posted some on this subject before.. but i have some new updates. I was getting water in my lower unit on my 1980's 200hp black max. After changing water pump kit, shift shaft seal kit and prop shaft seals (both seals, not large o-ring, could not...
  2. S

    Does this Oil have water in it?

    Ive been trying to locate and repair a lower unit leak on my early 80's v6 black max 200hp. First the whole water pump kit including the lower seal-assembly. next the shift shaft bushing and seal kit. at this point i pressure tested it and it held (~12 psi) under water for hours but when i took...
  3. S

    Shift Shaft Seals....Leaking

    I was getting water into the LU after replacing the water pump kit. Im just a driveway wrench'er but i thought i did the kit right. So I pulled the LU and did a pressure test using soapy water. I found the leak comming from around the shift shaft. My question is, I know I need the manual...
  4. S

    merc Lower unit removal STUCK!

    i removed the two nuts about 3/4 the way back on the LU and i removed the trim tab and bolt under that, I removed the nut on the single bolt that comes up out of the front of the LU, and I lossened the two nuts that are up towards the front of the LU (they wont come off until the lU drops...
  5. S

    Helm leak

    Ok I just acquired this fine craft with the hydraulic steering moving a 200hp merc. The Hynautic systems has a resiviour with the safty pressure valve on it remotely located at the stern. the steering was not working (the wheel whould just spin, no motor movment) So i found the Fill and purge...
  6. S

    Helm leak

    Ok I just acquired this fine craft with the hydraulic steering moving a 200hp merc. The Hynautic systems has a resiviour with the safty pressure valve on it remotely located at the stern. the steering was not working (the wheel whould just spin, no motor movment) So i found the Fill and purge...
  7. S

    hydraulic steering dead

    21ft wellcraft <br />1980-1985 200hp black max MERC<br /><br /><br />I just got a old black max merc 80-85 im guessing. The hydraulic steering does not work. The wheel will turn and I can hear the faint clicking of the pump. but no outboard movement. The outboard will NOT turn even by hand it...
  8. S

    Testing Tool? Neon tester.

    Is there a way to test the charging circuts as describled in my manual withOUT the neon tester?<br />Maybe with a voltmeter?<br /><br />Does any one know what the neon tester is? or what it measures?
  9. S

    Rectifier swap out? Rectifier Specs? 80's 200HP evinrude

    I have two motors i have frankenstiened into one.<br />The first part of the NEW motor is the long shaft 1986 johnson 200hp, and the second ,the top end off a 1979 evinrude 200. MY qeustion is the recifier melted, its the three wire model the "tri-angle with the can". The other rectifier on the...
Top