Search results

  1. G

    oil pressure drops

    I have a 1988 king cobra with a 460 ci. I took it out on the weekend and noticed the oil pressure started at 80, went down to 40 while driving and when I was coming into the harbour, it was really low....around 10 psi at 6-800 rpms. The oil was changed in the fall with 30 weight omc brand oil...
  2. G

    First time winterizing

    This is the first time I have winterized an inboard\outboard and tell me what you think. It is a omc king cobra with a 460....started by changing the oil, oil filter, water/gas filter. Next, I opened the two drain plugs on the block, removed the hoses on the water pump and rubber caps that I am...
  3. G

    king bobra outdrive swap

    I have a 1988 king cobra outdrive with a Ford 460 king cobra engine. I want to swap out the outdrive to a Volvo sx outdrive , but keep the engine. It has 400 hours on the engine and the risers, manifolds and engine is all in great shape. I have been reading on here and would like to know if the...
  4. G

    Another winterizing question....

    I have never winterized an in board before and have read a lot of ways to do this. I have a king cobra with a 460 engine and was told by a friend of mine that all he does is get the engine to operating temperature and then feeds anti freeze through the muffs until it comes out of the lower unit...
  5. G

    new to omc...couple questions

    I have a 1988 bayliner 2655 with a n omc 460 king cobra. I hear a lot about open or closed water systems and heat exchangers. I have looked in the manual and am not sure which one I have. Question 2: I have a hard time when it comes to shifting from forward to reverse when I am docking. It seems...
  6. G

    1992 Force 150 compression minimum?

    Hey guys, was wondering what the minimum compression on my 150 Force should be? 3 cylinders are 125 and 2 are 112. Is this ok? Thanks.
  7. G

    force rpm guage

    Just wondering if an automotive rpm gauge will work for a prop trial. My rpm gauge is no good and looking for an alternative till I get a new one. Thanks .
  8. G

    90 hp force hard to turn over

    A buddy brought his boat over for me to take a look at today. When trying to Start it on a full charge battery, I noticed it was hard to turn over. Pulled plugs and 125 psi on all 3 cylinders. With plugs out, there is no problem turning over. Any ideas?
  9. G

    Force 150 hp lower unit

    Just seized up my lower unit this morning and debating if I should rebuild or look for a used one. It's a 1992 and I believe it is a mercury lower unit. If I go for a used one, is a 125 hp interchangeable? Maybe someone can steer me in the right direction on which ones will fit. Thanks a bunch!
  10. G

    force 150 trim motor

    Just wondering if I remove my trim pump off my motor to get serviced, with the trim fully up, what should I expect as for fluids? Do not want to leak as my boat is in the water...thanks.
  11. G

    force 150 no spark

    So, 2 weeks ago I started it up and it ran great. I replaced the impeller a week ago, go to start it and it turns over, but no spark. I tested for spark the old fashioned way by pulling plug and grounding it while turning the key....no spark. What is going on?!. Checked the neutral switch, kill...
  12. G

    150 force temperature sensor...???

    I was looking on the new to me boat and realized that there is no temp. gauge . I would like to install one and was wondering 2 things. First, would you go with a block mount or screw in style and where would either of these be the best place to mount them? Can I use a screw in style where the...
  13. G

    Force 150 reeds

    I was wondering if anyone has ever tried the boyseen power reeds to improve performance, and, if so, are they worth the money? Thank you in advance.
  14. G

    1992 150 hp force impeller housing needed

    Wondering if anyone can help me find one. My housing has a tiny crack on the top and am wondering if anyone knows where the best place to find one is. I have been searching online, but not much luck. Thanks in advance.
  15. G

    Yamaha model number

    Hey guys, hope you can help. I have a 2010 Yamaha 15 hp , 4 stroke. The model is f15LMH. I am looking for a rectifier/ regulator for this motor, but the model does not show up on any search. Any ideas? Maybe a part number ? Thank you.
  16. G

    sanding bottom of boat

    Ok guys, I am new to the forum and would like to start by saying that you guys are very knowledgeable. I am new to the anti fowling paint and have a few questions. I recently bought a boat and noticed that the paint was chipping off the bottom. I have been scraping the bottom for 2days now and...
Top