FORUM RULES UPDATED - The forum rules have been updated to continue to provide a friendly and safe environment for our member community. Please take a moment to review the updated rules and our terms of use and privacy policy. Click here for Forum Rules which has links to the 'terms of use' and 'privacy policy'.
Hi all,
I need to know if the crank & rods will interchange between these two motors:
1990 Johnson 140
J140CXESR
1994 Evinrude 120
E120TLERC
According to what I can find on the BRP site, there are differences in part numbers based on the "suffix", but everywhere else I read says the suffix...
Thanks to some help I got on this forum, I have finally got this boat in shape enough to start tuning...
So, from the beginning...I have a 1996 Stratos 278 with an 1994 Evinrude 120 V4. Currently have the engine mounted to a CMC ML-65 jack plate. I have had the luxury of testing two props on...
After reading all the posts for water pressure gauge mounting on a V4 Looper...I am still stumped...:confused:
My 94 has no water control valve, but it also has no water tap on the adapter plate behind the throttle linkage as mentioned in many posts...currently it is attached at a tee on the...
Long story short, I have a 1994 Evinrude V4 Looper - E120TLERC with an overheating problem...:(
I bought the boat used and decided that the best bet would be to go ahead and pull the lower unit and replace the water pump and I also pulled the thermostats and heads to check for excessive carbon...
Hello to all and before I begin, let me say thanks and glad to be aboard...I have spent the last week reading through posts and obtained a wealth of information about my new boat and motor...many thanks to all!!
I've got this engine mounted on a 1996 Stratos 278 with a Viper 13 7/8 X 19 SS...
