Recent content by SliderM72

  1. S

    Motor won't shut off

    OK, this isn't the worst problem to have!<br />Motor is a 1988 115 Yamaha. I started it for the first time in a few months and had trouble getting it to fire up until I thought to mess around with the kill switch, I took the clip out and pulled it all the way out, and it started right up. I let...
  2. S

    Broken cavitation plate

    The motor is a 1988 115 Yamaha. I have had saltwater corrosion issues with it before, the lower gear housing cracked in 2 different spots, but were successfully welded. My problem now is the most of the cavitation plate has broken off. It had a hydrofoil on it and still has the forward holes in...
  3. S

    E-tech prices?

    I have looked everywhere I can think of and cannot find any price info on these motors. I don't expect them to be cheap, but would like a ballpark $ on a 115 and 130. If anyone can tell me or steer me in the right direction I would greatly appreciate it.
  4. S

    E-tech prices?

    I have looked everywhere I can think of and cannot find any price info on these motors. I don't expect them to be cheap, but would like a ballpark $ on a 115 and 130. If anyone can tell me or steer me in the right direction I would greatly appreciate it.
  5. S

    How much does it cost?

    Can anyone tell me how much a new instrument wiring harness for a Honda BF130 should cost?<br />I believe the part # is BEEDE2, 32102-ZW7-010AH.<br />Thanks.
  6. S

    Marine Tex for thru hull transducer?

    I'm trying to mount a Hummingbird Matrix 27 Transducer thru hull. The directions specify a slow cure 2-part epoxy. Does this fit the bill or am I asking for trouble? My problem is that I'm in Central America and there are no marine stores nearby, and all I have is MarineTex and some Fiberglass...
  7. S

    Prop size Yamaha 75

    Motor is a 1998 Enduro.<br />Doesn't seem to be turning enough RPM'S, but I don't have a tachometer to be certain. I'm guessing I'm turning no more than 4000.<br />Current prop is a D 3 x 13 x 19 R M.<br />Can someone please tell me if this is the right prop? Thanks
  8. S

    d

    g
  9. S

    what oil filter for a honda 130bf?

    Couldn't find it, AND DON'T HAVE A MANUAL YET.
  10. S

    What oil for Honda 4stroke?

    I´m currently in El Salvador and am having a hard time finding oil for a bf130 Honda 2004 or 05. What oil could I possibly use that would be easy to obtain? Will automotive 10-40 work? Thanks
  11. S

    Can I convert a pull start to electric?

    I´m trying to find out if it is possible to convert a Yamaha 75 Enduro from pull start to electric. I do not have model number, but it doesn´t appear to be any older than mid to late 80´s. I am in El Salvador and am assuming it is different than domstic models. I will try to locate model number...
  12. S

    Navionics/ Cenral America?

    Looks like I am going to El Salvador to run a couple of Pangas for sportfishing!<br />I was wondering if anyone had used Navionics down there and if so how well it worked.<br />I will be starting from scratch and need to map ledges etc. Any info is greatly appreciated.
  13. S

    Florida Flounder

    Size from 16"-24" all caught on incoming tide using mud minnows on the bottom. [/IMG]
  14. S

    How much should this cost?

    Does anyone know how much it should cost to rewind and reinstall a pull rope starter recoil spring? The motor is a 1982 4.5 hp Johnson Seahorse. Thanks
  15. S

    How do I recoil a starter spring?

    I have a 1982 4.5 Johnson Seahorse and I can't figure out how to keep the starter spring seated. I see that there is a bend and a 1/4" turn? but don't know where it should go to keep it in place.
See more
Top