Recent content by Kbaden1979

  1. K

    2013 4.3 Mpi with 14 pin. No power to coil

    The motor is on the stand! All fuses are good! Cranks just fine! No spark. Does the transom plug need to be plugged in? Shift interrupter plug need jumped? I’m a carburetor guy! The 10 pin plug is so simple.
  2. K

    2013 4.3 Mpi with 14 pin. No power to coil

    It is as the diagram I posted
  3. K

    2013 4.3 Mpi with 14 pin. No power to coil

    The “H” pin is empty! I have 12v at the A pin! Just like the diagram I posted.
  4. K

    2013 4.3 Mpi with 14 pin. No power to coil

    Thanks, I’ll check it out.
  5. K

    2013 4.3 Mpi with 14 pin. No power to coil

    Here is the diagram
  6. K

    2013 4.3 Mpi with 14 pin. No power to coil

    H is a spare.
  7. K

    2013 4.3 Mpi with 14 pin. No power to coil

    There is no power to the coil! Tested with a volt/ohm meter. Baden Marine Engines LLC Just thought there may be someone that would have an idea. Thanks.
  8. K

    2013 4.3 Mpi with 14 pin. No power to coil

    I have jumped A to C! No power to the coil. Engine cranks, power is at the (A) pin. But know power to the coil. What’s up.
See more
Top