Recent content by jredman941

Because of your help I was able to locate the problem, the wire for the diode was removed from the ing switch, thank you very much for all of your help.

Thank you, all of that helps me troubleshoot

I tested it for continuity and got no reading through both sides of the switch

Maryville, tn. There is no power coming to the roller switch in the control box

I will, just trying to cover all possibilities so I don't keep bothering people, I really do appreciate your help, I have never dealt with Electric shift before.

So this could be my problem, any way to test the vacuum switch ?

I don't know the purpose of the switch, I have looked over the diagram alot.

I replaced the starter but not the solenoid, it starts fine, I seen on the diagram that power was routed from the solenoid through the vacuum switch then on to the control

It's cool, I appreciate all the help, it's a johnson shifter, could abby of this problem be in the starter solenoid, it got real hot and the starter quit while the guy I was buying it from was trying to show me it it run.

Cool, I understand, what an I looking for in the shifter ?

Yeah, I know it has to be running, do you mean the throttle/shift control ?

Troubleshooting 69 55hp johnson that won't shift into reverse or neutral, I'm not sure where the power is supposed to come from for this Electric shift, I get no power on blue or green wires.