Recent content by Four22

  1. F

    Parts Diagrams for Four Winns

    Here are the 3 really crappy photos that I have. I thought I had better ones
  2. F

    Parts Diagrams for Four Winns

    Pretty sure it’s cable from the steering wheel to transoms then power assisted. I guess I’m struggling to figure out what to replace items with unless I pull them out and get a part number to reference. The boat is at a lake an hour away so typically I buy the parts I need and go fix it.
  3. F

    Parts Diagrams for Four Winns

    I have a 1995 four winns and need to find some steering components. I have about 10-15 degrees of slop in the steering wheel and seems like it’s somewhere in the box behind the dash. I’ve looked on the web but haven’t found a good source…. Where do people go other than the dealer to find...
  4. F

    1975 Evinrude 25

    Well… got the motor out last week on the lake. Ran fine all morning. Started up first or second pull. On the last leg in, the dang thing would barely run. I hely it wide open but it only ran about 1/2 of max rpm. Not sure what’s going on and haven’t torn into it yet…. On top of that, broke...
  5. F

    1975 Evinrude 25

    That’s what I’m looking for but there’s 2 marks on the cam. Does roller go between the marks, on the first or on the second?
  6. F

    1975 Evinrude 25

    One more question….. where does the roller for the throttle go in relation to the 2 marks on the timing advance? When the roller is between the 2 marks, should the butterfly be just starting to open? I’ve dug around and can’t find the exact adjustment
  7. F

    1975 Evinrude 25

    Not 100% sure honestly. I know for sure one if the bulbs I had was bad. And judging by how loose the old connectors were, I’d say there was leak at an o-ring. I opted for a complete fuel hose with crimp clamps on it trying to eliminate as many variables as possible
  8. F

    1975 Evinrude 25

    Problem solved. Ran for an hour and a half in the driveway tonight. Now it’s time for a test ride! Thanks all!!
  9. F

    1975 Evinrude 25

    New fuel line procured. Hopefully try it out this evening and see what happens….
  10. F

    1975 Evinrude 25

    I’ll check that too. It’s is an old metal can that was used last year on a different motor with not problem.
  11. F

    1975 Evinrude 25

    Agreed definitely leaning out but can’t source the problem. Compression was 120 in each cylinder. I’ll report back after the new fuel line and see what happens.
  12. F

    1975 Evinrude 25

    I have a 1975 Evinrude 25 horse, model 25502B that I’m trying to get running correctly. I’ve replaced the fuel pump and lines under the hood, cleaned and rebuilt carb, points and condensers, spark plugs and checked coils. Also replaced water pump and thermostat. The motor starts up fine with...
See more
Top