Current visitors

dingbat's latest activity

dingbat replied to the thread Needs some volts and amps for your 24 trolling kicker ?.

Auditable noise isn’t the issue. PW supplies and controls are notorious for EMI emissions. Cross talk with “Maximizer” controls and...

Yesterday at 4:13 AM
dingbat reacted to DeepCMark58A's post in the thread Nobody fishing? with Like.

Nephew and his buddy are coming up this weekend, we are going to be more mobil this time and see if we can find some active pike during...

Tuesday at 6:11 PM
dingbat replied to the thread Needs some volts and amps for your 24 trolling kicker ?.

Trolling motor spec: PWM Frequency: To avoid audible humming noises, it is recommended that PWM controllers operate around 15–25 kHz...

Tuesday at 6:10 PM
dingbat replied to the thread New Stuff on Vehicles likes/dislikes.

Here is the TSB for the three years prior to yours https://static.nhtsa.gov/odi/tsbs/2022/MC-10225529-0001.pdf

Monday at 5:39 AM
dingbat replied to the thread Wiring a 3 wire trim/tilt pump to throttle handle switch.

Wire size is a function of load over distance. Splicing a smaller diameter wire on to a larger wire equals the sum of the drops of both...

Sunday at 6:46 PM
dingbat replied to the thread New Stuff on Vehicles likes/dislikes.

Guess I’m lucky. Only idler I’ve ever gone bad was on a 2001 Chevy 5.3. @ 100k. The Toyota was OE when we sold it at 199k. The Civic...

Sunday at 6:27 PM
dingbat replied to the thread New Stuff on Vehicles likes/dislikes.

The F150 has 3 level, manual seat and steering wheel warming. The Mazda has heated and vented seats front and back along with a heated...

Saturday at 6:33 PM
dingbat replied to the thread 67 Year Old Head Bolts.

I use my hammers. It’s all the other tools I’ve collected over the years. Have a hard time passing up quality tools at a bargain...

Saturday at 9:12 AM
dingbat replied to the thread 67 Year Old Head Bolts.

Worked in the metals industry my entire life. Learned early on quality over quantity. Problem being, after all these years, I have...

Saturday at 6:26 AM
dingbat replied to the thread 67 Year Old Head Bolts.

Quality ball peen hammers heads are forged and hardened, even tempered some times, specially for metal working. Unlike cast steel, a...

Friday at 8:29 PM
dingbat reacted to airshot's post in the thread Been a little cold. with Like.

Every outboard I have ever owned has the mfgr. stating that their motors should be stored vertically if temps are going to go below...

Friday at 2:35 AM
dingbat reacted to tphoyt's post in the thread Random with Like.

I wear this with pride

Friday at 2:33 AM
dingbat replied to the thread 67 Year Old Head Bolts.

Length (in inches) = Length (in inches) * Δ Temperature (in °F) * ε (in / °F). Steel = 0.0000065” / °F. Aluminum = 0.0000128” / °F...

Feb 5, 2026
dingbat replied to the thread Been a little cold..

Owners manual says to flush and store the Opti in vertical upright position. Buddy has twin 275 verados on his transom. Drain and...

Feb 5, 2026
dingbat replied to the thread After 20 years of lake boating, tried something completely different.

Fish out of Ocean City, Md. and Virginia Beach, Va. on a regular basis. Going back in after dark from a day offshore (40-90 miles out)...

Feb 5, 2026

Show older items

Home
Members

Top

View All

View All

View All

View All

View All

View All

View All

View All

Boat Bimini Tops

Boat Covers

View All

View All

View All

View All

View All

View All

View All

dingbat's latest activity

Follow Us