Recent content by confused_15

  1. C

    OMC Turbojet 115 impeller housing, warning horn, warm cranking

    Re: OMC Turbojet 115 impeller case, warning horn, warm cranking Re: OMC Turbojet 115 impeller case, warning horn, warm cranking I'm back and I have all of the parts I need. I have been working on cleaning all of the parts to get ready for reassembly, and I have also been grinding down the new...
  2. C

    OMC Turbojet 115 impeller housing, warning horn, warm cranking

    Re: OMC Turbojet 115 impeller case, warning horn, warm cranking Re: OMC Turbojet 115 impeller case, warning horn, warm cranking Well it's been a while, took a minute to get all of the gaskets and parts shipped, but I finally removed the muffler adapter cover. Now as I've said before I'm no...
  3. C

    OMC Turbojet 115 impeller housing, warning horn, warm cranking

    Re: OMC Turbojet 115 impeller case, warning horn, warm cranking Re: OMC Turbojet 115 impeller case, warning horn, warm cranking Well you can say it again, I got a torch from the store and was finally able to loosen the drain plug, and I didn't even blow up! Also used it to seperate the...
  4. C

    OMC Turbojet 115 impeller housing, warning horn, warm cranking

    Re: OMC Turbojet 115 impeller case, warning horn, warm cranking Re: OMC Turbojet 115 impeller case, warning horn, warm cranking The 50/50 mixture worked! I was able to work the impeller housing off after I let it seep in for a couple hours. Looks like the drive shaft seal has rust completely...
  5. C

    OMC Turbojet 115 impeller housing, warning horn, warm cranking

    Re: OMC Turbojet 115 impeller case, warning horn, warm cranking Re: OMC Turbojet 115 impeller case, warning horn, warm cranking For starters, thanks for the response I appreciate it! impeller case - Probably should have used "housing" instead of "case". (#22 in 3rd pic below.) Spark plug...
  6. C

    OMC Turbojet 115 impeller housing, warning horn, warm cranking

    Thread Summary: Impeller Housing Stuck - WD-40, Liquid Wrench, PB Blast (no go) - Tapping side-to-side using a wooden block and mallet (no go) - 50:50 Acetone and ATF mixture (Success!) - Heat using a torch or heating element (yet to try) Warning Horn not working - Still at a loss on this one...
See more
Top